How to wash plastic windows and window sills

With the arrival of heat, many housewives start spring cleaning. This includes cleaning windows and window sills. Often on plastic products there are traces of street dirt and dust, excess moisture from flowers. If you do not wipe the windowsill in time, yellow spots begin to form on it. How can you get rid of this problem, let's take a closer look.

Choosing a way to clean the windowsill

The first step is to remove the dust and dirt from the window sill in a dry way. Only after that it is necessary to resort to chemicals and cleaning with water. It is necessary to take into account the coating of plastic products.

Smooth glossy finish

1. For window sills with such a coating, you should use soft fabrics or sponges. Adaptations should not contain abrasive components, metal chips.
2. The use of microfiber cloths and wet fabrics is allowed. You can also use melamine sponge. Try cleaning the surface with the listed agents before proceeding with chemicals with active ingredients.

Ribbed or rough coating

1. To clean the windowsills with a similar structure, it is allowed to use hard brushes and sponges. It is important to follow the process, otherwise you risk leaving visible scratches.
2. Eliminate the cleaning method with soft rags and cotton sponge, otherwise the abrasive surface will become clogged with dirt. To clean the pollution without the use of special tools will not work.

General recommendations for cleaning window sills and windows

1. To get to the dirt between the window sill and window frame, you should resort to using an unnecessary toothbrush or cotton buds.
2. If on the surface of the plastic product there are signs of repair in the form of soil, glue or foam, you need to purchase a rubber spatula. You can get rid of the problem without damaging the surface.
3. In case you decided to remove the pollution by popular methods, it is worth paying special attention to the process. Some chemical components are quite aggressive.As a result of the procedure, the plastic window sill may change color.
4. When buying funds to clean the surface from contamination, consider the fact that the product packaging must be marked with the scope of the substance. Components of the product should allow to work with plastic coating and windows.
5. Do not neglect the safety rules and instructions for use. Start cleaning the window sill by wiping with a sponge dipped in warm water. It is also important to wipe the plastic product dry with a clean rag.
6. During cleaning, try not to use tools with hard abrasive particles that do not dissolve in water. If you want to get rid of a specific stain, it is worth applying the chemical composition to the contaminated area. Normal soap solution is not able to save you from this problem.
7. Before removing the effects of repair, the composition should be soaked, resort to using a sponge and hot water. Also, to achieve the best effect, you can use soap, rubbed on a grater. If the above simple methods did not help get rid of the problem,need to use more effective means.

Folk methods of cleaning window sills and windows

Melamine sponge

1. With the help of a melamine sponge, almost everything can be wiped off, be it stubborn old dirt or rust stains.
2. If you do not have the opportunity to purchase such a tool, use the chips from the soap. The substance will help to cope with light pollution.

Soap-based solution

1. You can dilute the highly concentrated solution on the basis of soap (half a bar for 0.5 liters of water).
2. It is enough to apply the substance to the problem area, wait a bit, then carefully rub it with a toothbrush or kitchen sponge.

Dishwashing liquid

1. For disposal of stubborn grease stains suitable detergent for dishes in the form of a gel.
2. Apply the composition to the pollution, wait half an hour, work out with a sponge. Then wipe the surface dry, if necessary, repeat the manipulation.

Chalk and starch solution

1. If the oily stain is relatively fresh, sprinkle it with chopped chalk. Wait a third of an hour, rub the pollution with a brush and water with starch (100 gr. Per 1 l.).
2. You can also use special wipes for cleaning microwave ovens, they are sold in all hardware stores.

Washing powder

1. In case you are dealing with an ingrained old stain, powder for a washing machine with active ingredients will come to the rescue.
2. Dilute the composition in a small amount of water, the output should be a thick gruel. Apply the mixture to the stain, wait 20-25 minutes, rub with a sponge and non-hot water. Wipe the window sill dry.

Lemon acid

1. Citric acid solution or natural citrus juice copes well with difficult fouling.
2. Mix 10 gr. acids with 30 ml. water, apply the product for 10 minutes, then intensively rub with a brush. You can also squeeze lemon juice to the place of pollution and repeat the manipulation.

Chemical substances

1. To get rid of children's drawings made with felt-tip pens or pens, ammonia or pure alcohol will help, as well as acetone nail polish remover.
2. Apply any of the listed components to a cotton pad, rub the soiled area with the impregnated material. Fix the result with a detergent; if necessary, repeat the procedure several times.

Baking soda and vinegar

1. It is important to bear in mind that the interaction of such components may whiten the surface too much. Therefore you should not keep the composition on a plastic coating for more than 10 minutes.
2. Combine the required amount of soda and 9% table vinegar. Add liquid if necessary, as a result should be a thick gruel.
3. Apply the product to the places of pollution, wait 8 minutes, wipe the surface with a kitchen sponge. Wash the window sill with warm water, wipe with a dry cloth.

Mustard

1. If your home does not have a white window sill, it should be cleaned with mustard powder. Dilute the bulk composition with water until a homogeneous slurry, apply to the problem area.
2. Sponge some dirt with a sponge, repeat the procedure if necessary. Be careful, the tool can leave irreparable stains on the tinted coating.

Hydrogen peroxide

1. A solution of hydrogen peroxide and water will help to deal with yellowish smudges and stains. Components need to be combined in a 1: 1 ratio.
2. Apply the solution to the stain, rub it. Be careful. The composition can adversely affect the coating and leave stains.

Before you start cleaning windowsills, study the structure of the coating. If it is smooth, do not use products with abrasive components. In the case of ribbed surfaces, you can use a melamine or kitchen sponge, hard rags, napkins for cleaning microwave ovens. Citric acid, ammonia, soap, effectively remove pollution.

Video: how to clean windows