How to quickly remove the liquid wallpaper from the wall

How to remove the liquid wallpaper from the wall? Such a question arises in two cases: you put an unreducible stain, or you are tired of the wall design - it’s time to change something. Warn immediately, this is a dirty business. Especially if the liquid wallpaper was applied according to the rules. That is, the grip is very strong.

Removing liquid wallpaper from the wall is not very difficult. But dreary and long. Let's see what to do.

If the liquid wallpaper coated

Some owners after the final drying of the liquid wallpaper cover them with varnish on top. Sometimes it is then additionally painted. In this case, you have to work hard to remove them from the wall. For this you will need:

1. Masking tape
2. Thick film, very much.
3. Grinder, drill or grinder with a special nozzle.
4. Goggles, respirator, gloves. Best of all a spacesuit, you will find out below - why.
5. The ability to handle power tools, remarkable strength, endurance and a desire to leave the lion’s share of time and nerves in the room being repaired.

The order of work. First you need to close all surfaces in the room with polyethylene. Furniture, floors, window sills, windows, baseboards, chandeliers, sockets, switches, doors. Everything! For greater reliability, polyethylene is stuck with masking tape. It holds well, but does not leave marks and does not injure the surface.

After all the preparations, they put on protective equipment and begin to tear off the wallpaper from the surface of the wall with the help of a sander. It is necessary to press with a good effort so that the grinding wheel can overpower the paintwork and a decent layer of liquid wallpaper.

After five minutes of work, they understand their mistake and remove the means of protection. They are already covering their spacesuit. Because there is not a lot of dust and small garbage, but a lot!

By the way, according to reviews, a single grinder or drill will be small. After about 4 hours of hard work from the wild tension, hands stop working. And not every power tool will sustain such a rhythm. Usually, on the fifth square meter of the surface being cleaned, the sander burns out or the tape wears off.Drill heroically dies on the seventh square meter. The most enduring - Bulgarian. But she gives up after about ten meters.

During the respite, it is customary to look at the scale of destruction, to estimate the amount of dirt and the effort expended. Further, according to the rules of repair, it is necessary to spit on this bad job. Then comes the call to the master, who has stuck these liquid wallpapers to the walls. After a while, a team of good fellows arrives with an instrument similar to a metal detector. They are fast enough, but still dirty doing their job.

At the end, you give them the money and promise to use liquid wallpaper to repair other rooms. And then you type in a search engine - how to fix a hole in drywall? Because they tried very hard to remove the liquid wallpaper from the wall.

Council Do not cover liquid wallpaper with polymeric materials. No doubt, this design has been serving for more than 15 years. But when he bothers you, it will be hard to change him.

If liquid wallpaper without coating

Other owners do not create themselves unnecessary trouble. During the previous repair of the master they stuck liquid wallpaper on the walls. Beautiful, spectacular. People lived and admired.Varnish not smeared, paint is not painted.

But, one fine day inadvertently put a spot on the wall. Or decided to upgrade the coverage completely. So the owners are much easier. They will need:

Plenty of hot water and wallpaper paste or special liquid.

• Bucket or basin.
• Roller, brush, spray. We try, choose the most suitable tool.
• Wide hard trowel.
• A piece of oilcloth.
• Cookies with tea.
• Self-reliance and a little time.

The order of work. In water we part a little glue or special liquid for removing liquid wallpaper. Then the mixture is applied to the walls. We water plentifully that the covering was well impregnated. Here we look, which will be more convenient from the tools of paragraph 3. At the bottom we pre-lay a piece of oilcloth.

It makes no sense to handle a large area immediately. By the time you get there, everything will dry out. We saturate the liquid wallpaper with pieces. After that we leave for 10-15 minutes. This is where cookies with tea come in handy.

Then come back. We take a spatula and just confidently remove the liquid wallpaper from the wall. If they were applied according to all the rules of technology, they will be removed in even layers.We lay these pieces on oilcloth, let them dry.

We look at the time and effort. Is it a matter of dispute and stress? So we soak another part of the wall with liquid. As long as it swells, you will already clear the first.

A little dry up or wallpaper removed with an effort? Soak the coating again with water. Themselves again go take a break and chew cookies.

In this way, without straining at all, you can remove liquid wallpaper from a wall in a room at least 6 to 6 meters in one day. And do not spend money, causing a team of craftsmen finishers. At the same time and cookies poke plenty.

Council Removed wallpaper can be dried and stored in an airtight bag. In fact, this is a common papier-mache, only on the basis of wallpaper glue. They can be used several times. Of course, for the living room beauty will not be the same. And for a country house or a corridor such liquid wallpaper is quite fit.

If you do not want to remove the liquid wallpaper

The third category of people acts quite simply. They do not remove the liquid wallpaper from the wall. They just lightly grind the surface, then ground it.Top leveling putty is applied and ground again.

Well, and then they do everything that the soul desires and the repair budget allows. The method is widely used by a large mass of people, but professionals are very skeptical of such know-how. There is information that poorly applied liquid wallpaper then just fall off the wall with a new coating. Be it plaster, simple wallpaper or putty. Yes, and in rooms with poor ventilation or high humidity of the air, under such a “cake” of finishing materials, mold or fungus will gladly settle.

Council For any kind of repair, follow the recommended technology for applying the finish, so that in the future you do not have to spend even more money on rework.

Useful recommendations

1. Do you have such a miracle of modern technology at home, like a steam generator? Congratulations, it's even easier for you. Instead of a brush or roller, treat them with liquid wallpaper. Then things will go much faster, do not have to wait for a disintegration.
2. Some sources recommend that a construction dryer be used to soften liquid wallpaper.Don't even think about it! Electricity burn - enough for three Kremlin trees, and the result is almost zero. Because it is dry, without treatment with liquid, it is almost impossible to soften the liquid wallpaper with only one hot air.
3. Sometimes it is advised to take a spatula with a curved handle. Like a trowel. Say, it is easier to work. Bullshit. According to reviews, the most common straight spatula is much more efficient. Here the stiffness and width of the blade are more important, not the curvature of the handle.

How to remove the liquid wallpaper from the wall? If they were without additional coverage, it is very easy and simple. In the case when a paint layer is applied on the top of the wallpaper, it is better not to mess with it. Call the masters. Their services can be bought, but their nerves, health and strength - no.

Video: how to remove liquid wallpaper