How to save water in the apartment: 9 ways

When paying utility bills, the majority of Russians face the fact that, on receipt, the water bill is higher than other payments. As a result, many housewives clutch their heads, not knowing what to do. The high costs of housing and communal services are hitting the pocket of the family budget. The main water-consuming appliances are considered to be a toilet, bathtub, washing machine, heating boiler, dishwasher, and heated floors. Consider the current ways to save, give practical recommendations.

Method number 1. Saving water in the toilet

The toilet is considered to be the leader among other water-consuming appliances. You will notice that while saving water in this room, the costs will be significantly reduced.

1. Pay attention to whether the toilet has spills in the place of joints with other units. If any is found, immediately correct the problem. In terms of fluid flow, such defects can be compared with an open tap.
2. Leading manufacturers have taken care of saving water in the toilet room. They developed a toilet sink that is controlled by two buttons. The first lowers the tank completely, the second only half. Take advantage of this.
3. There is another simple way to save. Reduce barrel volume with a liter water bottle. Fill the container with liquid and place it in the cavity of the toilet bowl. The tank will fill up faster, which means that water consumption will be significantly less.

Method number 2. Saving water in the bathroom and shower

1. When people perform hygiene, the priority is to save hot, not cold water. To achieve the maximum result, you need to eliminate frequent bathing in the bath. Give preference to the soul, as the water consumption in this case is significantly reduced.
2. During water treatments with an average pressure consumes about 13-14 liters. fluid per minute.A quarter hour shower consumes much less water than a full bath. There are also a variety of shower heads for faucets, which, in turn, are designed to save water. Installing lotions will reduce consumption to 5-6 liters per minute. The principle of the nozzle is quite simple: the water is dispersed inside the device, so the process does not deteriorate.
3. Put the mixer with one lever, which immediately mixes 2 streams of water (hot and cold), minimizing flow. Visually place a memo about water saving in the house. This will serve as a constant reminder for households, who often do not seek to save the family (the younger generation).
4. Do not forget to turn off the water when you do not use it. This should be done at the time of brushing, shaving, rinsing the mouth, washing with a scrub and other cosmetic procedures. If we talk about the indicators listed methods can save up to 12 cubic meters of water per year.

Method number 3. Economical water consumption when cooking and washing dishes

1. Housewives wash dishes every day, in this case, an important aspect is saving hot water.For example, dishwashers, despite their impressive size, can save liquid consumption up to 13 times. Manual washing requires about 50 liters, and using a dishwasher requires only 15 liters with a considerable amount of dishes.
2. There is also a special nozzle on the faucet, which separates and sprays water, mixes with air, thereby reducing consumption. Try to wash the dishes in two stages: first, lather the dishes well and remove the leftover food in a separate basin or more often. Next, thoroughly wash the soap solution under a thin stream of water.
3. For use of purified water install the filter directly on the faucet itself. The method is considered much more efficient than in the case of a separate jug. In the process of cooking, clean all the necessary vegetables at once, then wash them in one fell swoop.

Method number 4. Reduced water consumption during cleaning and washing

1. When washing clothes, try to load the maximum amount of things. Reduce the schedule of wet cleaning clothes to a minimum. Choose on a typewriter shorter programs (about 15 or 30 minutes), they should be suitable for the type of products (silk, cotton, wool, flax, etc.).
2. As mentioned earlier, when the faucet is open, more than 12 liters of water are leaking per minute. When cleaning the apartment, do not forget about this aspect. Close the tap during each rinse. In a month, you will clearly see how the water costs for written receipts have decreased.
3. Please note if there are wells / wells near the place where you live. Use additional sources of water, do not neglect them. Such a move will help you clean up at no extra cost. Few know, but well water is in most cases much better than the well-known bottled water.
4. People living in private homes should pay attention to the rain ebb. As a rule, the device is installed under the roof. When a large amount of precipitation falls, accumulate them in buckets or tanks. After that, water the plants with rain water or use the composition for a rough car wash.

Method number 5. Water saving with water meters

1. To save water when counters are installed in an apartment, it is important to identify the number of registered citizens and the number of people living in fact in a particular room.As a rule, the installation of water meters is considered illogical if a large family lives in the apartment, which is not registered here.
2. Depending on the type of structure, about 175 liters per resident person. per day, which is equivalent to 525 liters. fluid for a family of 3 people. For this reason, the installation of water meters is unprofitable in the event that the dwelling is used for renting to tenants (tenants).
3. Saving water will be significant only if, for example, 5 people are registered in the apartment, but in fact three people live. If you decide to install meters, before the procedure, calculate the actual consumption per person, only then make a decision.
4. If you two have about 150 liters. per day, it makes sense to install water meters. Such a move would significantly save the family budget, because, in fact, about 175 liters are allocated to one resident. water

Method number 6. Save water by checking for leaks

1. If you come to the decision to save water, the first thing is to do a banal check for leaks. Inspect the entire plumbing and water mains for visible damage.
2. Shut off ordinary faucets in the kitchen, bathroom and toilet. Use the water indicator to check the movement of the fluid: if there is no leak, it will remain stationary.
3. Record the water meter readings and limit the use of fluid for a while. If the figures match, it means that the plumbing fixtures are in integrity.
4. Conduct an experiment with a dye. Pour the powder into the toilet tank: if after 30 minutes paint appears on the inner wall of the product, there is a leak in the device. In this case, the water consumption increases by 50 liters per month.
5. When it comes time to pay bills, every time ask the workers of public utilities if the prices for their services have risen. This way you can make the right decisions about saving water.

The issue of saving water in an apartment and house has always been relevant. The most expensive are the bathroom and toilet, in the second place is the kitchen faucet. Use special nozzles and single-lever mixers, try to change the design of the meter or install a magnet on it. Agree with households that water saving is now a priority for you.

Video: how to save water at home