How to get rid of scratches on glasses: 6 ways

Scratching glasses is an unpleasant discovery for many people. In addition to the fact that such a defect distorts visibility, it also damages the wearer's vision. In cases where the accessory lenses are made of plastic, scratches can be polished using household tools at hand. You will no longer need to buy new glasses or repair old ones for fabulous money. It makes sense to consider important aspects in order and provide practical recommendations. So let's get started.

How to remove small scratches on glasses

Remove minor scratches that are formed in the process of light friction of the lens with the surface is quite simple. Before proceeding to the procedure, wipe the glasses with a special cloth for PC monitors or LCD screens. You can also use the cloth that comes with the glasses.

1. Toothpaste. To remove small scratches, take a toothpaste without abrasive particles (suitable for any child or "Black Pearl").Apply a small amount of the composition to the surface of the lens, go through the cosmetic sponge with light circular movements, do not press hard. After all manipulations rinse the paste with cold water. In the case of deep scratches will have to repeat the action 2-3 times.
2. Drinking soda. If at hand there is no toothpaste without abrasive particles, use the composition based on soda. Dilute the bulk composition with filtered water at room temperature so that a pasty mass is obtained. Spread the product in place with scratches, rub with a microfiber cloth or cosmetic swab.
3. Scratch paste. In the salon of optics, you can purchase a special gel for polishing lenses. As a rule, the cost varies from 220 to 500 rubles, it all depends on the manufacturer. The technology of using the product is quite simple: apply the gel on the surface of the lenses, wipe with a special alcohol wipe (included). Some manufacturers recommend to sustain the paste for some time, push off the instructions.
4. Silver / copper polish. In cases where the above compositions were not effective enough, use a paste for polishing silver or copper.The tool can be purchased at a jewelry or antique store, the pricing policy is relatively low (about 250 rubles). To use the composition, spread it over the lenses with a thin layer, then wipe with a microfiber cloth or a velvet cloth. It is important to remember forever that a copper / silver polish should not fall on the rim of the glasses, otherwise you will ruin it.
5. Wax for polishing cars. There are cases when scratches do not disappear after using the methods described above. This feature is typical for deep creases, which can be filled artificially. For these purposes, get a wax for polishing cars (for example, "Turtle Wax"), use it according to the instructions. The tool fills not only deep scratches, but also microcracks. When polishing is complete, clean the lenses with a napkin soaked in alcohol. Repeat simple actions 1 time in 5-7 days. Optionally, you can replace autopolish with furniture wax.

How to remove large scratches on glasses

The above means are effective in the case of small scratches.If the lens coating has become cloudy from the defects that have appeared, a more colossal approach is needed, such as removing the upper layer. It is important to understand that after the procedure the glasses will be without protection, and the procedure is only suitable for working with plastic. This is especially true for accessories designed to work on a PC, as well as sunglasses.

1. First of all, wipe the lenses with a special cloth for glasses soaked in alcohol solution. After that, wipe the lenses dry with a microfiber cloth, lift the glasses higher to see scratches.
2. Visit the shop that sells art products and kits for needlework. Get an abrasive composition for glass parts, turn the bottle upside down, study the “Composition” column. The tool should contain hydrofluoric acid, the main purpose of which is the dissolution of glass. Since your lenses are made of plastic, this effect will not occur. However, you can remove the top layer without touching the main part of the lenses.
3. Protect your hands, respiratory system and eyes (if possible) when working with the material.Remove the lenses from the rim of the glasses in order to make your task easier. Prepare a glass or plastic container in which the procedure will be carried out. Make sure that the container is not used for storing food in the future.
4. Scoop a small amount of the composition on a cosmetic swab or sponge, apply an even thin layer on the coating, place the lenses in the container. Leave for a certain period (the exact time is specified by the manufacturer in the instructions). As a rule, it is about 2-3 minutes, not longer.
5. Remove excess makeup with a cosmetic sponge or cotton pad, wash the lenses with cold water. Wipe dry, wipe with a piece of velvet fabric. Insert the lens in the frame, evaluate the result. In case of insufficient effect, use a polishing compound specially designed for glasses.

After the procedure, purchase a special protective film for lenses in the optics salon, it will prevent further scratches. Wear glasses in a case, regularly wipe them with a microfiber cloth. Fill the cracks with car polish or furniture gel. Consider popular recipes based on toothpaste or baking soda.Buy polish for copper or silver, in extreme cases, remove the coating with abrasive for glass.

Video: perfect cleaning of glasses for 3 minutes