How to get rid of mold on plastic windows

To date, plastic windows are not considered a luxury, they are installed for convenience and thermal insulation. Double-glazed windows are mounted in industrial and residential premises, offices and even greenhouses. Plastic windows have their advantages and disadvantages. The latter can be attributed to the appearance of the fungus on the slopes and frame. Mold spreads in a short time and does not look aesthetically pleasing. It is for this reason that many housewives want to quickly get rid of the source of bacteria. There are many ways that we'll talk about today.

The causes of mold

1. Inadequate ventilation. Poor circulation leads to stagnant air and increased humidity. Often you can feel the unpleasant smell emitted from the room. Double-glazed windows do not allow air, it is a plus and a minus at the same time.To eliminate the negative side, you need to equip a room with good ventilation or more often open windows. Synthetic curtains, wide window sill and slopes significantly impede access to oxygen.
2. High humidity. Due to the thermal insulation properties of the material, condensation forms on the surface of the windows. It accumulates first in the lower part, then goes down to the corners. Plastic can not evaporate moisture, unlike wood. If we add to the above the incompetence of the masters for the installation of double-glazed windows, the tightness is broken. Water stagnates, allowing bacteria to multiply at double speed.

How to get rid of mold foci on double-glazed windows

1. To reveal that humidity is increased, visual inspection will help. If condensate accumulates in the lower part of the glass unit, the mold has a chance of full reproduction.
2. Inspect the fire. If you notice blotches of black, proceed to eliminate them. Prepare a solution of biocides and whiteness, remove the fungal neoplasms.
3. If mold has affected the slopes and drywall, disassemble the structure.Treat with the same solution, dry, warm with 3 layers of foam.
4. When the foam becomes hard, cut off the excess with a stationery knife. Fill chips and possible gaps with sealant. After all the manipulations, cover the slopes with finishing material or paint.
5. Next, process the glazing with a solution marked "Anti-mold". Apply the product on plastic parts, withstand at least 2 days. After that, wash the windows in the usual way, without using cleaning compositions.
6. To further control the level of humidity, buy a hygrometer. The device shows deviations, you will be able to take measures in time with regards to airing the room. The mark should not rise above 35%.
7. If it is not possible to reduce the humidity, wipe the window with a dry cloth every day. Also hang a thermometer that measures air temperature. Try to keep the indicator in the range of 20-22 degrees.

How to wash the mold on plastic windows

1. Chlorine-containing drugs. Means like chlorine not only eliminate mold, but also allow you to disinfect the room. Bleach must be diluted. On 100 ml. drug accounts for about 500 ml.water. Wear a miniature respirator before handling the moldy areas, protect your hands with gloves. Whiteness kills the fungus immediately, so it makes no sense to withstand the tool for a long time. The hard composition of the bleaching product adversely affects the decor. No need to use bleach when removing mold from the front parts of glass.
2. Copper sulfate. The product is sold in household and gardening stores. As with bleach, you need to wear rubber gloves and protect your airway before treatment. Further, the composition is distributed on the sponge, it is already wiped the frame, window sills, slopes, glass. It is not necessary to distribute vitriol on metal elements, so as not to cause premature corrosion. When the cleaning is completed, ventilate the room for 1 hour.
3. Chlorine and vitriol. If you need to eliminate a large amount of mold that has managed to hit the inner layers of the material, use the mixture. Combine the chlorine-containing drug and copper sulfate in equal quantities. Dilute with water to 1 l. liquid accounted for 200 ml. the mixture. Wear a respirator, protective gown and gloves, proceed to the elimination of the fungus.Wipe windowsills, frames, slopes, leave the composition for a maximum of 10 minutes. Always complete the cleaning with a regular wash.
4. Table vinegar. To eliminate the source of infection, you can use undiluted vinegar. First wipe the area of ​​the mold with a dry cloth, then sprinkle the affected areas with vinegar. Try to distribute as much of the composition. After 2 hours, blot with napkins, rub the area with a mold with a sponge. If the fungus is not completely removed, repeat the steps again.
5. Hydrogen peroxide. Make a paste from baking soda and filtered water. Spread the gruel over the areas with mold, then pour the hydrogen peroxide into a spray bottle. Sprinkle with a soda-treated area. You will notice that the substances have reacted. Bubbles will appear on the surface. As the hissing stops, note the time, wait a quarter of an hour. After this period, remove the excess with a sponge, wipe the surface with a cloth moistened with water. Open the windows, air the room for half an hour.
6. Soda. Drinking soda kills the fungus immediately. Prepare a solution of 120 gr. bulk product and 350 ml.water. Stir to dissolve the granules. Moisten in the composition of the rag, walk on the moldy sites. Try to scrub the fungus. If it does not give in, apply a slurry of soda and water on difficult areas. Wait 20 minutes, remove the dirt with dry wipes. Soda does not need additional flushing if there are no gray marks left on the glass packs.
7. Detergents. If you need to remove the mold, choose a composition designed for cleaning plumbing or ceramic tile. The following products have proven themselves well: Silit Beng, Domestos, Sarma, Amway, Mr. Proper, Vanish, Ushasty Nyan. At the pharmacy, you can buy disinfectants such as NEOMID, BIOcid, Clotrimazole, Candid.
8. Ether of tea tree. Many housewives use all sorts of natural oils that kill the fungus. Buy pharmacy tea tree, rosemary, geranium or patchouli. All of these tools have bactericidal and disinfectant properties. Mix any oil with salt in the same quantities. Pound into porridge, spread on areas with mold lesions. Rinse off with ordinary water in half an hour.

Preventive actions

1. To minimize the formation of fungus, you need to maintain a microclimate in the room. The level of humidity should not rise above the level of 35%. In this case, the optimum temperature regime is considered to be 20-22 degrees.
2. Eliminate sources causing high humidity. These include possible leaks at the joints of sewage pipes, frequent drying of clothes in the room, and accumulation of indoor plants.
3. Install a system that can air and ventilate the air. If this is not possible, ventilate the room at least 3 times a day for 25-40 minutes (it should not be damp outside).
4. Modern windows are equipped with a handle that controls the window in two positions. In the cold season, often turn the lever up, ventilating the room with a small hole.
5. If mold appears on the glazing in the kitchen, install the hood. Use the device every time you cook.
6. You should not create the soil for the development of fungus in the bathroom.Always use a plastic window hood, and after bathing, leave the door open until the moisture evaporates.
7. Synthetic and thick linen curtains impede the action of radiators. Warm air can not get to the plastic windows to dry them and remove condensate. Change the accessories with open light tulle.
8. Do regular cleaning of windows, frames, slopes, and window sills. The procedure is performed at least once a week, if possible more often. For prophylaxis, use vinegar or baking soda mixed with water.
9. If you notice that condensation often forms on the glass, collect it with a soft cloth. Try to keep the glass in a dry position to eliminate the possibility of mold.
10. If windows are installed long ago, check the rubber seals. Perhaps they let moisture from the street. Once a month, wipe the slopes, frames and glass with the tool "Anti-mold".
11. If you have doubts about the correct installation of windows, insulate the slots under the sill or along the frame. For these purposes, use a sealant or foam.

Remove foci of high humidity, it is necessary to inspect the structure, if necessary, warm it with foam and treat it with an anti-mold effect. Remove the black blotches with tea tree oil, copper sulphate, soda, vinegar, bleach, directional detergents. Observe preventive measures, often wipe the windows dry.

Video: how to get rid of mold folk remedies