How to get rid of mold in the washing machine

Was the washing machine even after a long airing smell of damp? Do black spots appear on the rubber cuff or powder container? Things after washing give a staleness? Symptoms indicate mold. The fungus is dangerous for family members, because it reduces immunity, causes chronic bronchitis and inflammation of the brain. The moldy machine is thoroughly disinfected to stop the spread of spores and destroy microorganisms.

Cleaning products

Black coated parts are cleaned with a hard sponge or brush. Use special antifungal agents, for example, sprays from Astonish or Savo. Domestos will also come in, which will destroy the mold and remove the smell of dampness.

Cover your mouth and nose with a respirator or gauze bandage; put on dishwashing gloves on your hands.Antifungal agents produce toxic fumes, so it is important to protect yourself from intoxication.

Apply Domestos or other substance to the parts, lubricate the rubber cuff, pour into the containers for powder and rinse aid. Wait 2–3 hours, then wash off the remnants of the product from the machine with a stiff sponge. Details rinse several times. The cleaner can form a film on the inside surface of the drain hose or cistern. During washing, the antifungal compound is absorbed into clothing and causes allergic rashes.

The sponges that washed the mold are thrown away. They are a source of fungal spores that multiply rapidly and spread throughout the house.

Purification of parts from black bloom - only the first step. Mold can lurk in hard to reach places, so after washing the washing machine proceed to disinfection.

Bleach and high temperatures

Set the maximum temperature, usually it is 90–95 degrees. In the container for powder pour 1 liter of bleach containing chlorine. For example, inexpensive "Whites" or some other means.Start the wash, but leave the drum empty.

After 30 minutes, turn off the machine, leaving the water inside, or delay the start for 3-4 hours. Let the drum and other parts soak in a solution with chlorine. Then the equipment is started, and when the rinsing mode is activated, 2-3 cups of table vinegar are poured into the air conditioner section.

It is impossible to mix the components, otherwise the product may damage the rubber parts. In the gentle form, instead of bleach with chlorine, food or calcined salt is used. 400-500 grams of powder fall asleep in the tray and set the maximum temperature. The smell of dampness is removed with citric acid, which is added to the rinse water instead of vinegar.

After disinfection, the machine is wiped with a dry, clean towel and the door is left open for a day. It is advisable to remove the tray for the powder, because water may stagnate in the container. The bathroom opens a window to provide ventilation.

Fresh aroma and no mold

Favorite place of the fungus - a rubber cuff? Will help copper sulphate.

1. To put a pinch of means in a glass of water, to stir while the additive will not be dissolved.
2. Infuse the solution for 1–2 hours so that there are no dry particles left that can eat up the gum.
3. Apply a medication based on vitriol on the cuff with a toothbrush or sponge.
4. To process hard-to-reach places, leave for a day, so that the chemistry can destroy all fungal spores.
5. After 24 hours, prepare a solution from detergent or laundry soap.
6. With a soft sponge, remove the remains of vitriol with a black crust.

Be sure to wear gloves, otherwise the chemistry will cause allergies or burns. The cuff is disinfected, the turn of the drum has come:

1. Pour into citric acid washing powder supply container. It will take 2–3 packs.
2. Throw in the machine 1–2 clean kitchen towels, so that the equipment does not work idly.
3. The duration of washing is 1–1.5 hours. Choose a mode for synthetics or other dense fabric, so that the machine works at maximum. Temperature below 90 degrees.
4. Be sure to turn on the rinse with clean water.

Is there a smell of mold? So, the fungus had time to spread to the filter. It is better to call a professional who can carefully remove the part and clean or put a new one.

Cheap and fast

A black patina appeared on the rinse aid container? Remove the tray, rinse it under the tap and clean it with a toothbrush with soda and detergent. Put on a rag and dry, and then return to the place.

Buy on the market the packaging of the cheapest powder. Type in hot water in a washing machine, pour 1-2 tablespoons of an inexpensive product into a container. Turn on the equipment literally for 3-5 minutes, leaving the drum empty. Throw inside the machine another 10-15 g of cheap powder, run. After idle washing is completed, drain off water. Do not rinse, let on the walls will remain an alkaline layer that will protect the equipment from mold.

Domestos and Citric Acid

In advanced cases, only heavy artillery will save. You will need an aggressive detergent homeostos. It corrodes even rust, and copes with mold in a matter of minutes.

The first step is to wear rubber gloves and close the windows in the bathroom. Apply liquid to the drum and rubber cuff, carefully rubbing the product into the parts with a stiff sponge. Close the machine and leave it sour.

After 4 hours, select the rinse mode, not the wash. Turn on the equipment and fill the machine with three spoons of citric acid. Wait until the rinsing stops. Switch to the wash. Water should be very hot from +90 degrees.Put 200 g of citric acid in the powder container. Run the process.

It remains to wipe the drum and ventilate the machine. Guaranteed fresh flavor and no black bloom. Citric acid will also clear the heating element from a layer of scale. If something gets cracked or falls in the device during the washing process, it is recommended to stop the process and look into the drain hose to remove brown patches from there.

There is a second way to get rid of mold with citric acid:

1. The component is mixed with a cheap washing powder, you can add a little bleach.
2. Dilute the mass with water to make a thick gruel.
3. Paste is processed drum, tray for the air conditioner and a rubber cuff.
4. Thoroughly rub the tool into the parts using an old toothbrush or sponge.
5. Leave for a day, closing the washing machine.

Then wash off the residue in rinsing mode, switch the equipment to boiling and set the timer for 4-6 minutes. The machine after such a procedure smells good and looks like new.

Peroxide Disinfection

Chlorine and aggressive chemicals even remove the mold in just one time, but they contribute to the hardening of rubber parts.The cuff and drain pipe is covered with small cracks and fails. If there is little black residue and there is no strong musty smell, it is recommended to use peroxide:

• Pour 200 g of regular soda into the powder section.
• Add peroxide, preferably in tablets. Enough 10 pieces.
• Start the wash by selecting a temperature of +90 degrees.
• The machine should work in the enhanced mode for 20-30 minutes, then turn on the rinse.

It remains to remove all removable parts and lay on a towel. Wipe the drum with a dry cloth, remove and rinse the filter.

Has mold remained even after peroxide or Domestos treatment? It is recommended to replace parts of the washing machine: tray, drain hose, rubber cuff or filter. The main thing is to determine how much of the equipment has become a source of infection.

Prevention

It is easier to prevent the appearance of the fungus than to deal with the bloom and unpleasant smell. Monthly pour citric acid into a washing machine and turn on the equipment without loading laundry into the drum. The additive will clean the heating devices from scale and bacteria, protect the device from mold.

One of the causes of the fungus - rinsing.The more expensive the conditioner for clothes or linen, the washing machine is worse. After the product remains a thin film on which mold multiplies. The tray, in which there was a rinse, was thoroughly washed after washing, the drum was wiped inside with a damp cloth.

The machine is not designed to store dirty and clean clothes. If you keep the sheets and socks in the drum, there will be not only a fungus, but also a sharp unpleasant smell, from which even citric acid will not save.

Fighting mold is difficult. The fungus actively multiplies and remains on washing clothes, bedding and children's toys. It is distributed throughout the house, attacking the immunity of all family members. But it is easy to protect yourself, it is enough to air and regularly clean the machine so that the black patina has no chance.

Video: how to clean the washing machine