How to get rid of fogging of plastic windows

Modern windows are much stronger, more comfortable and more airtight than old wooden ones. However, new plastic windows often bring additional chores in the form of fogging. After all, before, with wooden frames, we did not encounter such a problem. Usually condensate accumulates on the windows in the winter time. Caring owners wipe and dry windows, but why this run in a circle, when you can just get rid of fogging.

What hurts condensation on the windows

1. Water on the windows increases the humidity of the room. It is very dangerous if there are people in the house with a disease of the respiratory system. Especially asthmatics.
2. Condensate runs consistently and fungus and mold can form on the walls. Sometimes you do not even notice them - they are under the wallpaper. Spores of mold and mildew are very dangerous for human health.
3. Dampness of the room spoils the repair.Constant water under the finish makes syr and swell all around.
4. Well, the aesthetic side of the issue. It is completely unpleasant when the windows "cry".

Now you know that you need to get rid of window fogging. But where does this condensate come from? Why didn't wooden frames flow?

Causes of window fogging

Full tightness. Plastic frames provide full tightness without the slightest possibility of air circulation. When installing frames, all slots are closed, and the frame itself is completely airtight. Some people additionally close the mine holes so that “the heat does not go away”. Humidity remains indoors and invariably settles on the windows.

High humidity. This applies to rooms in which steam is constantly formed. For example, a bathroom, kitchen or balcony, which moved the gas stove. Cooking or hot water in the bathroom is accompanied by the constant formation of steam, which settles on the coldest - windows.

Insufficient heating. Often the cause of the window fogging may not be enough hot air in the room.This usually happens in the offseason, when the cold has already come, and the heating has not yet been given.

Incorrect installation of radiators. Have you noticed that the batteries are installed strictly under the windows? Sometimes during redevelopment, the owners change the location of the radiator without even knowing what they might encounter. Hot air from a warm battery rises and dries window glass. Sometimes the cause of condensation can be a wide window sill, which is usually set by indoor plant lovers. Hot air just can not go around the battery and goes "sideways".

Change of seasons. Plastic windows have different modes when working in winter and summer time. Before the cold period, you need to translate the window "in winter mode." In this position, changing the position and fit of the rubber seals. This will help reduce the amount of condensate.

How to get rid of fogging of plastic windows

1. To start, remove the cause of fogging. If sweating in the kitchen, then there should be a good hood, which must necessarily be included when cooking.
2. Solve the heating problem. If the batteries are not hot enough, you should complain to the appropriate authorities or find alternative sources of heat, for example, a heater.
3. If the batteries are not under the windows - urgently change their position to the former. Without this, you will not be able to cope with the "weeping windows."
4. If you have a wide window sill, you need to replace it with a narrower one. There is another option - to make special vents in the windowsill, through which the hot air from the radiator will fall on the glass. This is done very simply and looks aesthetically pleasing (there are special grids for such holes).
5. Ventilate the room regularly. Even in winter, you need to ventilate the room, otherwise moist air will not find a way out and will settle on the windows. This can be done by fully opening the window for a few seconds or leaving a small click for 10 minutes.
6. For drying water droplets on the windows, you can use air conditioning. If it is installed in a "weeping" room, hot air should be directed to the glass. By the way, the air conditioner has such a function "drying". That it should be used.
7. There is one more way to get rid of window fogging. For this glass you need to wipe with a special liquid, which is used by motorists. It is for this purpose and intended.However, the effect of such a wipe will last only a few hours.
8. Sometimes, to get rid of fogging of glasses, it is necessary to review the quality of the window installation. Inaccurate angles of inclination, uneven slopes can cause incorrect flow of air and heat transfer. Call a competent master and consult with him.
9. In older homes, ventilation shafts are most often clogged. Therefore, before winter, you need to carry out preventive cleaning every time. This event alone will reduce the appearance of condensation on the windows by half.
10. And do not forget to change the work of plastic windows in accordance with the season. By the way, maintenance of plastic windows should be regular and annual, even if you do not have problems with fogging of glasses.
11. If all of the above methods did not help you, then there is a cardinal method - to change the windows to two-chamber structures with energy-saving glass.

Plastic windows deservedly found their consumers. After all, such windows are affordable, they serve for a long time, they are soundproofed, they are beautiful and environmentally friendly. But some are faced with the problem of fogging windows.It should be noted that condensate is not a defect in plastic windows, it is a problem of disturbed air circulation in the room. And if you establish the correct heat exchange, everything will fall into place and the windows will no longer “cry”.

Video: fighting condensation on plastic windows