How to learn to feel the dimensions of the machine

If you are an inexperienced motorist or have purchased a new car with large or, on the contrary, small dimensions, you need to get used to it and learn how to feel, because the possibility of maneuvers and road safety largely depend on this. In order to feel your iron horse, there are whole specialized courses in driving schools, but you can learn this art without spending money.

Dimensions: why to feel them correctly

Dimensions refer to the length, width and height of the car. They are different in different models, you can recognize them in the manual. Knowing the dimensions, you can easily park and maneuver through the city streets. The feeling of your own car will help you to park without problems in a small area, or move over rough terrain with trees or other obstacles. Also, this must be considered when buying a garage.

The feeling of size comes only after a while as a result of regular trips. Also it is necessary to listen to practical advice that will help to do it a little faster.

Important aspects

The main mistake of beginners is the desire to see what happens in front of the bumper, this habit is very undesirable. In addition, it is dangerous when driving: when you drive, you need to look only in front of you, and not in front of the bumper.

When you park your backside, it is important to properly adjust the mirrors, they will become the main assistants. This setting has the following form: external mirrors should be directed and show the driver the rear axle wheels. External are applied to feel lateral outlines. Pay attention to the extreme portion of the exterior mirrors.

When traveling along a highway outside the city, if it becomes necessary to change lanes to another lane, look at the corresponding side mirror. Often inexperienced drivers cut other road users because they do not understand what, in fact, needs to be done with these mirrors.It is possible to carry out restructuring only when in the mirror you see the whole car that moves behind you.

Special Markup

For this workout, you need to find a platform with a flat surface, it is desirable that it be asphalt. Additional materials are spray paint or chalk. The following lines should be applied to the site:

• 1 - the line that "continues" the right wheels and forward and back.
• 2 - the line of the left wheels.
• 3 - continues the line of the front bumper.
• 4 - rear bumper line.
• 5 - continuation of the axis of the front wheels.
• 6 - continuation of the axis of the rear wheels.

Take a seat in the driver's seat and take the correct position for the ride. Mentally continue the line of wheels (1 and 2), mark the points where they intersect with the front panel, where it connects to the windshield. For labels, you can use adhesive tape or colored stickers. They will help you navigate where exactly the wheels will move, the trajectory of their movement. When you learn to feel the dimensions, you can remove these marks: your trained brain will figure out which part of the road the wheels will go.

Beacons

For such a workout, you can use special plastic cones or make similar ones with your own hands. It is enough to fill ordinary plastic bottles with sand and stick thin long poles into them. It is best to mark them with a bright flag (the brighter the better) - the main thing is that it should be clearly visible.

Place two beacons in front of the car. Approaching, you only need to touch them slightly, but not knock them down. You can also "probe" and the rear bumper. Side dimensions will help to feel the same labels set on the sides of the machine. For a start, they should be far away, then you need to move them closer as soon as it was possible to successfully pass between them. The smaller the distance, and you will be able to successfully overcome it, the better you will be able to park and drive through narrow streets.

Wheel feel

For this exercise, a plastic bottle (empty) or a cardboard box is useful. Place it in front of the machine in front of the right and left wheels. Now try to run into her one or the other. You can also learn to feel the rear wheels. Now take two such beacons, put them at such a distance so that they can get between the wheels.Such training will help you learn to “miss” the pit wheels and pass them between the wheels.

Other landmarks and exercises

If you cannot immediately determine where the bumper ends, set additional landmarks, such as a small antenna or so-called cilia for headlights. When reversing, you can use the rear bumper antennas as a guide.

To train your braking and control your stopping distance you can do this training. Make the acceleration to the desired speed, and then slow down sharply. Now place the cones or cardboard boxes and learn to brake in front of them. The result will be positive when you can shorten the distance between them as much as possible.

For training it is useful to do the exercise "Snake", passing between the chips. At the very beginning you need to move slowly, then gradually increase the speed, until the complete improvement of skill.

The G8 will also be useful, but first you need to practice the oval, and then the full eight. When the car moves back, it is more maneuverable, and this should be taken into account.

Another fascinating exercise using a guide from boxes or lines. So, if you chose the boxes, put them on the side of the car, first with one, then with the second. It is necessary to drive up to the obstacle as close as possible, but do not hook it.

Orientation in the dimensions of your own car is very important. This will help easier to move around the city, overtake, park, go around obstacles, drive through narrow streets. Your safety on the road fully depends on the qualitative sensation of the dimensions of the car.

Video: how to learn to feel the dimensions of the car