How to whiten a medical gown at home

As a result of constant exposure to chemicals, the fabric turns gray, loses its whiteness and looks untidy. Hence the need to whiten a medical gown at home. We have collected an effective collection of recipes, we consider them in order.

Salt and ammonia

The tool is ideal for cotton products with the addition of synthetic fibers. To prepare the composition, take 55 ml. ammonia (ammonia), 80 ml. hydrogen peroxide solution (concentration 6%), 175 gr. food ground salt. Stir all ingredients, pour in 8 l. warm water (temperature about 40-45 degrees), wait until all the crystals melt.

Pour the soaking solution into the basin, send the medical uniform to the container, leave for 30-45 minutes depending on the degree of contamination (intensity of gray or yellow shades).

After the expiration date, rinse the product with your hands; complete the procedure with a machine wash. In the first compartment, add the powder, in the second - 125 gr. drinking soda. Expose the intensive wash cycle, dry the bathrobe away from direct UV light, otherwise it will turn yellow.

Chlorhexidine and baking soda

Purchase in a pharmacy "Chlorhexidine", add 125 ml. drug in a container with soda. Send a scrub to your pelvis, remember it with your hands. Cover the tank with a bag to save steam. The exposure time of the product in the solution is 40 minutes, then you need to pull out the clothes, squeeze them and move them to the household machine.

Expose the intensive washing mode. As in the previous case, add baking soda to the second compartment (100 gr.), And add the whitening powder to the first one. At the end of all manipulations, remove the bathrobe, dry away from the sun.If you are not satisfied with the result, wash again, increasing the amount of "chlorhexidine" to 150 ml.

Hydrogen peroxide and ammonia

Pour 8 liters into a deep basin. warm water (about 40 degrees), add 200 ml. ammonia and 185 ml. hydrogen peroxide solution, the concentration of which does not exceed the mark of 6%. Stir the compound, dip a medical gown into the water, constantly heat the product with forceps so that it does not float. Cover with polyethylene, leave for 2.5-3 hours.

Wear gloves, a protective mask, rinse the uniform with your hands. Next, move the clothes in the household machine, wash at 50 degrees with the addition of bleach. Dry away from sunlight, preferably in fresh air. If the contamination is strong enough, add 20-25 ml to the prepared solution. turpentine, it will greatly simplify the process of removing stains.

Soda

The technique is perfect for bleaching medical uniforms made from thick cotton and flax. Pour 7 liters into the pelvis. hot water, add 100 gr. soda ash, mix to dissolve the crystals.Send a bathrobe to the tank, soak for 40 minutes. During this time, the solution will cool down, so you can easily carry out hand washing. Always wear a protective mask and gloves to avoid burns.

After manual processing, place the form in a washing machine, set the temperature to 70 degrees. In the first compartment, add 85 gr. soda ash, in the second - washing powder "Automatic", pour in the rinse. Dry in fresh air, avoid UV rays.

Vodka

Pour 0.7 liters of vodka (if desired, you can replace 250 ml. Of ethyl alcohol) in a basin, add 350 ml. warm water and 320 ml. liquid glycerin (sold in a pharmacy and any online store). Stir the composition, lower the medical coat in the solution for soaking, leave it for 35-40 minutes.

After the due time, remove the form, wash your hands. Rub the item with laundry soap over the entire surface, put it in a plastic bag and tie it up. Wait for about 1 hour, then (without rinsing) wash the medical gown in the machine. Add bleach and fabric softener to eliminate unpleasant odors.

Acetic Essence

Do not confuse ordinary vinegar with essence (its concentration exceeds the mark of 60%). Take 80 ml. composition, pour into the basin, add 7 liters. warm water, mix. Dip a medical gown into the tank, leave it to soak for 45 minutes. After the specified period, wear protective gloves, squeeze the product and move it into the machine. Set the washing mode “Very dirty laundry”, wait until the end of the cycle.

If desired, you can replace the vinegar essence with a table solution, in which case the amount of the second ingredient should be increased to 275 ml. on 6 l. warm water. The use of vinegar involves a natural drying in the fresh air, avoid exposure to direct UV light on the fabric structure.

Lemon acid

Citric acid can be used as an effective means of bleaching white clothes. To prepare the solution for soaking, take 55 grams. composition, dilute in 3 liters. hot water and mix until complete dissolution of the granules. After that, send a bathrobe to the pelvis, wait about 3 hours. Perform a hand wash with the addition of powder or use the machine.

You can also bleach a dressing gown with lemon juice, in this case, squeeze out a liquid from 5 fruits, strain it and dilute 4 liters. water. Soak clothes, wait 10 hours, do the washing in a convenient way (manual, machine).

"White"

The processing technology of the Belize uniform is quite transparent. In hot water (temperature 60-70 degrees), 3 caps of the drug are diluted (the exact amount is indicated on the back of the bottle). After that, the product is soaked for 5 minutes and rinsed with running water. It is important to remember forever that you can use “Whiteness” for processing a medical uniform no more than once every 25–30 days.

Proceeding from the sanitary rules and norms, all employees of medical institutions should wear clean, perfectly washed clothes.For this reason, uniforms of this kind come from lightweight, wear-resistant materials that can be processed daily. Use effective folk remedies that will easily cope with the problem.

Video: how to fold a medical gown