How to wash the shower from limescale

There are several types of hygienic treatment of a shower cabin. The current cleaning is to take care of the pallet and the walls of the chamber immediately after visiting it. The main care is made as it is contaminated, about 1 time in 2 weeks. General cleaning is carried out in cases where the cabin is too running and needs thorough cleaning. The current and main treatment is not particularly difficult, while the planned cleaning should be carried out with the observance of all precautionary measures.

Effective ways to clean the shower

There are popular and purchased means to rid the cabin of lime scale, consider them in more detail.

After each hygienic cleaning do not close the door, leave the cabin aired. At the end of the procedure, wipe dry the walls and the pan to avoid the formation of mold and plaque.

Take care when using cleaning products. Wear safety goggles, silicone or rubber gloves, protect the respiratory tract (mini respirator, disposable mask, cotton bandage, etc.).

Acid Formulations

An important aspect of the use of acidic agents is considered to be their caustic composition, which eats away the top layer. As a consequence, you need to carefully monitor the duration of exposure, without violating it.

Of the most effective compositions can be identified "Domestos", "Sarma", "Triumph", "Komet", "Faberlik", "Chistin", "Aist Ultra".

With regards to the technology of use, it is not particularly difficult: apply the required amount of the composition on the pallet, walls and other places of pollution. Wait half an hour (the exact interval is indicated on the back of the bottle), rinse first with cold, then warm water.

Oxalic acid
Processing shower enclosure in this way is carried out in 2 stages. The composition does not corrode the coating, but it is necessary to carefully apply it to the rubber and silicone seals. In the shops of household chemicals sold a solution of oxalic acid concentration of 6-8%.

Dilute it with purified water in a ratio of 5: 1, then moisten a foam sponge or cotton cloth in the composition, cover the affected areas. The exposure time is 10-15 minutes, proceed from the state of plumbing.

After this period, carefully rub acrylic pan, walls, plumbing. Dampen a soft cloth in liquid ammonia, repeat the previous manipulations, leave for 5 minutes. Rinse off the excess cleaning products with contrasting water (cold first, then warm).

Hydrogen peroxide
Do not confuse a solution of hydrogen peroxide with peroxide, the concentration of the second composition is 12 times higher than the first. Connect together 280 ml. purified water, 80 ml. hydrogen peroxide and 55-60 gr. loose gelatin. Wait a quarter of an hour until the mass swells up, then put on gloves, take a sponge and scoop up the product with it.

Spread the mass in copious amounts to the places of plaque formation, wait for about 8-12 hours, depending on the degree of damage.During the whole period do not open the cabin door, do not use it. After time, rub the places with a foam sponge, rinse with water, wipe dry. If necessary, repeat the procedure.

"White"
Chlorine-containing drugs have long been very popular among housewives. They are able to cope not only with mold and rust, but also with lime. To begin, wipe the cabin dry, then wear gloves, glasses, a gauze bandage. Soak a cloth in bleach or spray it with a dispenser bottle.

The exposure time varies from 3 to 5 hours depending on the amount of plaque. After applying the product and holding time do not rush to wash off the composition. Fold the gauze in several layers, rub it on the affected areas, evaluate the result.

Dishwasher cleaner
Acquire PMM gel at a hardware store, aimed at removing scale (Finish, Fairy Platinum, etc.). Treat the places with lime lime with clean liquid ammonia, rub with a sponge, wait 30-40 minutes. Now wash off the composition with cold water, cover the contaminated area with a gel for cleaning the machines,simultaneously distribute it over the entire surface.

The mixture will begin to drain, you need to update it within 45-60 minutes. For convenience, pour the solution into the dispenser bottle. After processing the shower cabin with a pure composition, mix 200 ml. gel 60 gr. gelatin, wait for it to swell, then apply to the surface and leave for 6 hours.

Wine acid
The resulting tool includes abrasive particles that adversely affect the structure of enamel. For this reason, it is not recommended to use the composition with frequent intervals. Mix in one mass 80 gr. tartaric acid, 110 ml. ammonia. Then add baking soda in such a way that a pasty mixture is obtained.

After preparation of the composition, protect the skin of the hands, eyes, respiratory tract, moisten a place with lime lime with vodka or ethyl (medical) alcohol. Scoop the mass with a kitchen sponge, spread the mixture over the surface, wait a quarter of an hour, rinse. Spend the action again, but increase the exposure time to 2-3 hours.

Hydrochloric acid

If the possibility of buying hydrochloric acid in liquid form is not available, purchase powder. Dilute 70 gr. preparation with purified water, scoop the resulting porridge with gauze cloth or a bandage, rub the affected areas for about 5-10 minutes, then wait another half hour, rinse with warm, then hot water.

Important!
Wear a medical bandage or respirator when treating a shower stall using this method. Otherwise, hold your breath, do not breathe volatile vapors. Since the preparation eats away enamel and the top layer, the method is designed for emergency cases when other technologies have not yielded a complete result.

Carbonated drinks
In the world wide web you can find a sufficient number of videos, on which Fanta, Sprite, or Coca-Cola are corroded by limescale, mold, rust.To prepare the "yadren" mixture, mix 600 ml in one solution. imported drink, 160 gr. baking soda, 65 ml. table vinegar (6-9%), 50 grams. citric acid. Transfer the mixture to a plastic bottle, seal it and shake it several times.

Bring the container to a place with a lime scale, open the lid and sprinkle the surface. Close, shake again, repeat the steps until you use the entire composition.

If, after the procedures, the contamination was not completely removed, prepare the solution again, adding to it 70 gr. gelatin. When the mixture swells, cover the desired area with an abundant layer, leave for 6-8 hours, remove residue with hot water.

Table Vinegar
You can use as an acetic solution (concentration of 9%), and essence. In the first case, connect 300 ml. product with 150 gr. washing powder, in the second case, mix 100 ml. essences from 300 ml. filtered water and 120 gr. dishwashing liquids.

When the mixture is ready, wait until the crystals dissolve, moisten the sponge, and treat all areas of lime deposits. If necessary, perform the previous steps 3–5 times until the result satisfies you.

Liming deposit is considered to be difficult to remove pollution.For effective cleaning of the shower stall, use liquid ammonia, tartaric or hydrochloric acid, acetic essence, carbonated drinks, hydrogen peroxide or chlorine-containing preparations. Take precautions.

Video: how to wash the bath without chemistry folk remedies