How to clean the kitchen set of fat: 7 ways

Any housewife tries to keep the kitchen set clean, as a result of which she carries out regular cleaning. However, there is not always time and energy to wash the wall apron or tabletop from a greasy deposit that accumulates in a very short time. After a certain time, the tumors turn into persistent greasy spots that cannot be washed off with dishwashing liquid or running water. At this moment, the first difficulties begin, since it is necessary to carry out hygiene, and there are not so many effective ways of removal. Consider each and them in order.

Baking soda and sea salt

A positive feature of this method is its versatility. The abrasive compound can be used on virtually any surface with the exception of varnished panels.Excellent result is achieved by processing aprons and kitchen furniture made of wood, tiles.

Important!
Before you start using the mixture directly over a wide area, perform a test on an inconspicuous part of the kitchen unit. Wait a quarter of an hour, then evaluate the result. If the abrasive particles do not damage the panel, feel free to proceed with the procedure.

1. Wear thick rubber gloves, take a kitchen sponge and soak it in hot water. Walk on the surfaces of the headset, softening the fat.
2. Take 100 gr. sea ​​salt without dyes and fragrances, put in a coffee grinder, grind. If there is no grinder, crush the composition into powder with a hammer. Mix the salt with 100 gr. baking soda, dilute the dry mixture with filtered water. In the end, you should get a thick mass, which can easily handle both horizontal and vertical panels.
3. Scoop a large amount of the product onto the hard side of the sponge or use an old toothbrush. Treat contaminated places by carefully rubbing the mixture into the surface. Wait about 15-20 minutes.
4. At the end of the period, take a sponge, wet it in water and wipe the panels again. After that, rinse the product completely with cold water, evaluate the result. If necessary, repeat the previous manipulations several times.

Salt

For the preparation of a cleansing mixture, you will need 100 grams. crushed edible salt and half a grapefruit. Pass the citrus through a meat grinder or blender, mix with salt. As in the case of soda, the composition should be thick, otherwise adjust it by adding salt or, on the contrary, water.

Scoop a large amount of money on the toothbrush, rub the spots with greasy stains. Glue on top of the food film, wait half an hour. At the end of the term wash the composition. If the result does not please you, repeat the procedure.

Important!
Salt does not always effectively remove old fat spots, in most cases it is necessary to repeat the manipulation 4 or even 5 times. If the kitchen is equipped with a light set, we recommend adding a teaspoon of peroxide to the salt solution. Such a combination will speed up the purification several times.

Mustard powder

Mustard is used in everyday life from ancient times, it is used to clean not only the kitchen, but also the furnishings in the bathroom. Also, the product washes dishes and removes complex dirt from the surfaces of household appliances.

To properly use mustard powder, mix 50-60 gr. product with cool water, you should have a thick mixture. Now cut the lemon into 2 parts, wipe it with fat stains, wait 5 minutes, then wipe again.

Repeat steps 5-7 times, only after that use mustard. Scoop up some of the mixture on a wet kitchen sponge, rub the panels well. Leave to soak for 5 minutes, then rinse with cold water. If you do not like the effect, repeat the steps.

Citric acid and alcohol

The product possesses not only cleansing qualities, but also perfectly disinfects the surface. To prepare the mixture, take 3-4 bags of citric acid, dilute with cold water. Do not wait for the complete dissolution of the granules. Scoop the composition on a sponge, apply to the kitchen set, wait 10 minutes. Rinse the sponge, soak it in medical alcohol or vodka, remove excess product. For best results, you can dilute the vodka / alcohol with vinegar in a ratio of 3: 1.

Cleaning products

It makes no sense to talk about which manufacturer to give preference. Choose the composition of financial opportunities. Below are practical guidelines for the selection and use of household chemicals.

1. It is important to understand that powder products involve treatment with abrasive particles, due to which it severely damages the lacquer surface. In this case, it is worth looking at the drugs that are produced in the form of an aerosol, gel or spray.
2. To remove fat, it is not necessary to pick up a hard metal sponge. Household chemicals dissolve contamination if you wait a certain period of time (indicated on the back of the bottle).
3. The special efforts from you will require an oven, electric / gas stove, hood and other metal surfaces. One soaking is not enough, you have to repeat the manipulation at least 3-4 times.
4. If you do not have a hood, due to which all the fat rises and settles on the top cabinets, soak them using polyethylene. Apply the product, glue the food film and fix with tape. Wait a while, clean the surface with a sponge.
5. When choosing a product carefully read the label, most manufacturers indicate for which type of surface this or that product is suitable. Do not mindlessly cover the headset with unfamiliar means. To begin, do a test on a small section of the tabletop / cabinet, then proceed to processing.

Table Vinegar

Fold the gauze or bandage in 8-10 layers, put cotton wool between the rows. Moisten the compress in acetic solution (not to be confused with acetic essence), rub the area of ​​pollution. If the coating allows, use a rigid sponge. In the case of low efficiency, add a small amount of liquid for washing dishes with a thick consistency to the vinegar.

Soap

As a means to clean the kitchen set of fat, use household soap or tar soap of maximum concentration.To properly use the product, take a kitchen sponge (foam and abrasive coating), soap the hard part and walk on the surface. Wait 20-30 minutes, rub the headset again. After the second stage, rinse off the excess with water and polish with a soft cloth.

It is necessary to fight fatty spots on the panels of the kitchen set immediately after they appear. Otherwise, it will be extremely difficult to achieve a result in one step. To start, try folk remedies, if the result is low, take a look at household chemicals.

Video: how to remove grease from kitchen furniture