The content of the article
The gas stove allows you to cook food in the shortest possible time, while significantly reducing energy costs. However, this home appliance appliance is most quickly clogged, forcing housewives to clutch at the head. Cleaning the pens and burners from greasy stains requires patience and attention to detail. The same applies to the surface of the device, which is enameled and glass-ceramic. To find the best cleaning methods, it is important to proceed from the type of coating. Consider the important aspects in order, we give practical recommendations.
Gas stove cleaning technology
- Disconnect the appliance from the gas supply panel before proceeding with the procedure.As a rule, it is enough to turn off the tap in order not to accidentally touch the handle of the stove and not to apply gas. In cases where the device has a starter button that is powered by electricity, unplug the power cord (unplug it).
- Prepare the solution: rub on the grater of the small section 1 bar of soap (the concentration of the active substances should not be less than 70%), pour 7-8 liters. boiling water, mix and bring the composition to a homogeneous state. After that, pour the hot solution into a wide container (basin, bath, etc.), place the grate into the cavity. Make sure that the composition covers the element completely. The exposure time is 3-4 hours, during this period the fat and cinder will soften, making it easy to remove the formation in the future.
- Remove the burners, set them aside, later we will look at the technology for cleaning these elements. While the grate is soaked, remove dry food residues, chips, seasonings, etc., which are easily removed without water. No need to treat the surface with water, otherwise the cleaning will be delayed for a long time. To remove residues, use a dry foam sponge or a lint-free cloth.
- The next step is cleaning the pens. This stage is considered to be the most difficult, since small elements contain many hard-to-reach places, which are difficult to get at. As in the case of the burners, we describe the process of cleaning the knobs below to highlight the main aspects.
How to clean glass ceramic gas stove
In addition, the use of salt and baking soda is considered to be prohibited "home" products for cleaning glass ceramics. The listed components also contain abrasive particles, which in their structure expose the coating to damage.
Neglecting this advice, you risk leaving microcracks on the surface, which will be filled with grease and dirt, thereby distorting the aesthetic appearance of household appliances.
Special cleaning products
For glass-ceramic panels, special cleaning products have been developed, which can be found in household chemicals departments. The following are considered the most effective: “Lav” (Perl, Bril, Cucina), “KAMA Sol”, “Fairy”, “Spul Balsam”, “Kara-Form Active”, “Tana Professional”.
To clean the stove using the listed tools, use the manufacturer's instructions, which is indicated on the back of the bottle. In most cases, it is enough to apply the paste / gel on the panel, maintain the interval, then rinse.
Folk remedies
- Prepare a solution for soaking: dilute 90 gr. powdered edible salt 125 ml. boiling water, stir to dissolve the granules. Fill the resulting solution with a gas stove, leave for 10 hours. After the expiration of the due date, remove the remains with a kitchen sponge, rub the panel with a damp cotton cloth, rinse with water.
- Grate a third of a piece of household or tar soap with a grater, dilute the shavings 170 ml. boiling water. Add 25 gr. drinking soda, 60 ml. Table vinegar (concentration 9%), mix to dissolve the crystals. Fill the cooked solution with a gas stove, wait 5 hours. After that, collect excess liquid with a cloth, clean the surface with a foam sponge, rinse with water.
- Connect between each 60 ml.dishwashing detergent, 80 gr. drinking soda, 20 gr. shallow sea salt. Dissolve 35 ml. silicate glue in 190 ml. filtered water at room temperature. Mix the two composition in one, fill the panel of the gas stove, leave for 1.5-2 hours. Next, clean the surface with a soft cloth, wash off the remnants of warm water, wipe dry.
How to clean the enameled gas stove
According to experts, the enameled coating is cleaned by the same means as the glass-ceramic. The only difference is that when processing enamel, alkaline and acidic preparations can be used, they will not spoil the coating. However, cleaning with hard metal sponges that scratch the enamel should not be carried out.
As for salt or soda, they can be used only as part of a solution, and not in a dry form. Even small abrasive particles damage the surface. In the case of folk remedies, the main feature will be the proportions, which vary with the characteristics of the coating.
- Mix 45 gr. salt with 65 ml. table vinegar, add 40 grams. soda Pour the mixture with hot water, stir to dissolve the crystals. Fill the enamel coating, wait 10 hours.After the time, rub carbon deposits and fat deposits, wash off excess water with clean water.
- Grate half a bar of laundry soap on a large grater, pour water in such a way as to obtain a pasty mass. Scoop a little of the product on the hard side of the foam rubber sponge, rub the surface with the composition, leave for 12 hours. After that, moisten the sponge with water, treat the contaminated surface, collecting grease and fumes. Remove excess paper towels, wipe dry.
- Dissolve in hot water 45 gr. powder for hand washing, add 50 ml. gel for washing dishes, stir until smooth. Pour the solution on the gas stove, cover the surface with a film of food, leave for 5 hours. Blot excess moisture, scrub the stove with a sponge, rinse.
- Mix 45 ml between them. ammonia (ammonia) with 5 liters. purified water at room temperature. Fill with the surface of the plate, leave for 1 hour. After the expiration date, thoroughly rub the dirt, wash the plate with dishwashing liquid.
Universal ways to clean the gas stove
To remove grease stains from the surface of the gas stoveUse the step by step instructions. It is suitable for panels of all types of material and is considered to be universal.
- Boil in the kettle 0.5 liters of water, fill the stove, leave for 2 hours. During this period, the old and burnt remnants of food will soften, so you can easily remove them.
- Blot the plate, collecting the liquid. Mix 200 ml. warm purified water from 150 ml. ammonia. Put on gloves, moisten a sponge in solution and carefully rub the polluted places. Important! Do not clean the stove with the use of a rigid metallic lip and products that contain abrasive particles (soda, salt, etc.). In cases where it is impossible to remove grease from hard-to-reach places with a sponge, use a cotton swab or a soft toothbrush.
- If you are unable to clean with ammonia, use the following tool. Squeeze the juice from 3 lemons, add 50 ml. vinegar, moisten in the composition of the sponge. Spread the solution on the panel, leave for 1 hour.
- Clean the stove with a sponge, rinse. You can also use citric acid: dilute 1 sachet of composition in 70 ml. clean water, add 35 ml.vinegar, use as directed.
How to clean the handles of the gas stove
Handles are rightfully considered to be complex elements in terms of cleaning, and fat often accumulates on their surface and under them, which is difficult to remove with an ordinary foam sponge.
Removable pens
- Prepare a soap solution: chop into cubes or grate 1/3 bar of laundry soap, pour boiling water, wait until complete dissolution. Dip the pens in the mixture, leave for 4 hours. After that, clean them with a hard iron sponge or toothbrush, wash it.
- To speed up the process, use vinegar essence (do not confuse with table salt, its concentration is 8 times lower). Mix 65 ml. product with 0.5 liters. hot water, lower the handle into the mixture, wait 2 hours. During this time, the fat and soot soften, you just have to remove them with a sponge and rinse with water.
- Put the pens in hot water for 5 hours. Prepare a paste of baking soda and vinegar so that it is thick. Remove the pens, sponge paste, rub each element, leave for half an hour. After this period, once again rub the fat deposits with a toothbrush, rinse.
Fixed handles
- Prepare porridge from soda and cold filtered water, rub the surface of the handles with a regular sponge. Try to remove fat to the maximum.
- Moisten a cotton swab in ammonia, carefully rub the gaps, corners and the area under the handles. Change sticks as you use them. Leave the composition for 1 hour.
- After a fixed period of time, remove the excess with toothpicks, rub the entire area of the handles and the area under them with a toothbrush, rinse with water, wipe.
How to clean a gas stove burner
- Remove the hotplates. Prepare a solution: dilute a third of the bar of soap chips in 3 liters of boiling water, place the elements in a container, pour the mixture obtained. Leave it to 1.5 ace.
- After the expiration date, wash off the top of the lid with dishwashing detergent or special household chemicals. Apply to the aluminum (internal) area of the burner paste that does not contain alkali and chlorine. Clean this area with a metal sponge or toothbrush.
- To wash the nozzles on which the burners are located, use copper wire. Pre-remove the hob, then remove the soot with a string. If possible, clean the metal on the hot, this move will facilitate the task.
It is easy to clean the gas stove, if you have sufficient information regarding the procedure. Use the universal technology of removing fat and soot, consider popular recipes based on soap, citric acid, soda and salt. Use household chemicals, follow the exposure time and manufacturer's recommendations.
Video: how to clean the grill on the gas stove
To send