How to clean a mink coat at home

Clothing has an unpleasant feature of getting dirty in the process of socks. When it comes to T-shirts or trousers, they are easier to clean than, for example, a mink coat. All products from fur require careful maintenance and compliance with certain precautions. Mink is not as easy to clean as it may seem at first glance. At the slightest non-compliance with the instructions, there is a risk of permanently spoiling the product.

Mink cleaning with sawdust

If we talk about manufacturing plants, mink products are cleaned there with the help of sawdust. The method is effective, so take a look at it first.

1. You will need, respectively, sawdust and medical alcohol. Sawdust is better to buy in pet stores, they should be made of oak, aspen, maple or linden.
2. Prepare a container, send sawdust into it and pour it with alcohol.From some sources you can find out that gasoline is suitable for pouring. But after it the unpleasant smell will remain for a long time.
3. Stir the sawdust with alcohol. Spread the fur on a table or other flat surface. Sprinkle with the prepared composition.
4. Carefully begin to knead the fur with your hands, so that in the process of manipulation the wood absorbs all the dirt. Then shake out a fur coat, comb it with a special brush for fur products.

Mink cleaning shampoo

Often on fur products there are spots that need to be eliminated first. In this case, the sawdust will not help, a cardinal approach is required.

1. Choose a shampoo with maximum moisture so that the product does not dry the skin of the product. Prepare a basin with water at room temperature or bring the liquid to a maximum of 30 degrees.
2. Pour in shampoo cap and mix by hand. It is important to get a dense foam. Take the second tank, fill it with clean (soft) water without impurities.
3. Spread the fur coat on a flat surface, arm yourself with a sponge. Dip it in the solution and walk around the area of ​​the fur product that needs cleaning.
4. Do not wet the fur so that the fur coat does not become too wet later. Try not to touch the leather part at all.
5. After wiping, walk around with a clean cloth dipped in warm water. Then get rid of moisture on the coat using a paper towel or napkins.
6. In conclusion, comb the fur with a thin comb or a special brush for clothes. Leave the fur coat to dry on a hanger in a well-ventilated area.

Sand mink cleaning

The method relates to environmentally friendly and safe. To clean the mink coat, follow the instructions.

1. Collect river sand, then rinse it several times under the tap. Additionally, doused with boiling water, let the excess moisture drain.
2. Prepare a griddle, put all the sand in it and heat it on the fire to a temperature between medium and high.
3. Spread the mink coat on a flat surface, sprinkle with warm sand. Touch only the dirtiest parts of the product.
4. Wait until the sand reaches room temperature. Then shake the fur coat and comb it.

Mink cleaning with talcum powder

At home, you can clean the mink coat using ordinary powder, or talcum powder.The composition is renowned for its ability to absorb excess dirt and grease. Especially effective way to be for mink white.

1. Before you begin to work, arm yourself with thin medical gloves. Choose a flat surface and spread fur on it.
2. Sift the talcum powder, then sprinkle it on the entire fur coat with soiled areas. No need to lay out the powder, as they say, with a slide. Just work the pile carefully.
3. When the powder covers the entire fur coat, start slowly rubbing it into the surface. After that, bring the product to fresh air and gently shake it.
4. You can additionally work the thing with a hair dryer using cold air. So the powder is quickly blown out of the cavity of the product. At the end, comb the fur coat.
5. Talc can be bought at the pharmacy. But if you do not have such an opportunity, use ordinary corn or potato starch. The processing technology is identical. The main thing in the end is well combed the fur coat.

Cleaning mink with semolina

Munk is one of those inexpensive food products that are also widely used in everyday life. Choose a quality composition and follow the instructions.

1. Semolina returns shine to the coat and perfectly absorbs the dirt. To begin the manipulation, select a flat surface and spread the product.
2. Manka copes with soiling on pockets, collar, cuffs. It also removes the yellowness, which often appears on white fur products.
3. Sprinkle the contaminated areas with dry semolina and gently rub your hands without strong pressure. After that, shake out the wardrobe item well and brush the fur coat.

How to clean a fur coat from mink stains

All of the above methods, with the exception of shampooing, apply to dry processing. To eliminate persistent dirt from the surface of the fur product, you will have to resort to the wet method.

Soap solution

1. Pour 30 degrees water into the basin, add a little baby shampoo or liquid soap. Beat in foam.
2. Spread the mink product on the table, lower the sponge into the mortar and walk through the polluted places.
3. Do not wet the leather part, so as not to provoke dampness. After cleaning, coat the fur coat with a damp, clean cloth, comb the fur.

Table Vinegar

1. The solution is used to make white and dark fur products shine. Arm yourself with vinegar concentration not higher than 6%. Dampen it with a cotton sponge and squeeze.
2. Spread the item on the table, carefully walk around the spot with the stain. If the fur is short, move against its growth. For long movement carried out on growth.
3. In order not to harm your favorite product, be sure to squeeze the cotton pad. Vinegar should not penetrate the skin of a fur coat.

Gasoline for lighters

1. Gasoline for refilling lighters is considered the cleanest, and therefore suitable for removing complex contaminants from a fur product. This option is only suitable for dark fur coats.
2. Dampen a brush for clothes, then comb a little thing with it. Do not exert a strong mechanical impact, move "light hand".
3. Finally, leave the fur coat in the open air for airing. The main thing is to avoid exposure to direct UV rays. Otherwise stains will appear on things.

Cleaning the lining of a mink coat

1. Often, after the season of wearing a fur coat, the fur remains almost pure, which cannot be said about the lining. To perform the manipulation with maximum benefit, it is recommended to unpick the cloth.Use the special tool, do not damage the product.
2. After carefully manipulating, stretch the fabric. Determine the type of lining in advance and set the appropriate mode on the washing machine. If the fabric is made of polyester or silk, the temperature should not exceed 40 degrees.
3. If the lining is made of cotton, the temperature may be higher. After washing, the product must be rinsed thoroughly. This way you can avoid divorce when drying. After the last step, carefully iron the fabric and carefully sew it back onto the fur coat.
4. Not everyone decides on such a crucial step. If you doubt that you can sew a lining of high quality, clean it on a fur coat. Consider, in this case, the manipulation should be carried out with extreme caution. In no case should you wet the bottom of the fur coat.
5. In order to thoroughly clean the lining, it is recommended to soak the sponge with foam and distribute the soap composition over the inside of the fur coat. Next, the fabric must be cleaned with a brush for clothes. The soap solution is removed with a damp sponge. Then blot the lining with a cloth.
6. Hang the fur coat on a hanger in a suitable place, the temperature should correspond to room temperature. Keep in mind that the room should not be high humidity. It is not a secret for anyone that in wet weather in winter the fur coat gets dirty from the bottom most of all, therefore it is recommended to sew an additional lining in advance.

Precautionary measures

In order not to spoil an expensive product, it is important to follow simple recommendations.

1. Remember, the coat can not be washed in any case. As a result, the fur is permanently deformed and spoiled.
2. Do not try to dry the product near batteries, open flame and heaters. The fur also deteriorates.
3. If you are in adverse weather conditions, and the fur coat is wet, hang it on a hanger. Dry the product in a room at natural temperature.
4. Do not try to iron the fur, even at the lowest temperature. In any case, you can not get rid of strong folds without consequences.
5. It is strictly forbidden to store the product in folded form. If this has already happened, hang a fur coat on a hanger. After a while it should stretch.

Mink coat care

1. Clean the fur only as needed. Look at the degree of contamination of the product. From frequent dry cleaning, the pile loses its original structure and begins to crumble. Get in the habit of using the services of professionals.
2. On average, mink coats withstand up to 5 dry cleaners. It is forbidden to contain a fur coat in plastic bags. Such material strongly electrifies the pile. In addition, the fur deteriorates due to lack of oxygen.
3. Every time you leave a thing for long storage in a special room, make sure there are no pests. To keep the fur coat from various insects, the room is recommended to be treated with special means.
4. In the people's councils in the fight against pests, a simple newspaper has recommended itself well. Pack paper sleeves, printing ink repels insects (mol). In addition, the coat will keep a good shape. It is forbidden to store other fur things near.
5. Remember that fur products perfectly absorb various odors. Therefore, before storing the room must be carefully ventilated. In the room you can put a special bag with pleasant incense.
6. It is forbidden to spray perfume on a fur coat, there are often stains from a cosmetic product. The latter can not be removed even with the help of dry cleaning. Do not try to constantly carry a bag on your arm or shoulder. In this place, the fur will soon be erased.

If the mink fur coat is not too dirty, resort to dry cleaning methods. In this case, suitable semolina, talc without fragrances, hot sand. To remove complex contaminants, you need complex artillery in the form of gasoline for refilling lighters, vinegar solution, and shampoo with water. Be sure to follow the precautions when working with a fur product.

Video: cleaning white mink coat