How to clean the silicone phone case

The life of a modern person is hard to imagine without a phone. Constant calls to work, intimate conversations with friends, the solution of pressing issues - all this requires communication from a distance. In addition to the gadget, the designers have developed a phone case that protects the case and gives the product an aesthetic look. Silicone nozzle does not make the smartphone heavier, but it quickly gets dirty, losing its former beauty. Hence the need to clean the security attribute in all sorts of ways, which we will talk about today.

Wet Silicone Case

The main disadvantage of a silicone case is considered to be its impracticality. The whole thing in the material, which perfectly absorbs dirt, leaving it in its structure. For this reason, rigid materials that can deform the product cannot be used.

Important!
Do not wash the silicone case with iron scouring pads, chlorine-containing products, products with large abrasive particles, carpet brushes. Do not attempt to scrape off dirt with a knife, sandpaper, scissors, screwdriver.

Sharp objects deform the structure, as a result of which dust and dirt will enter the surface. Chlorine will cause clouding of the transparent cover and the appearance of yellow spots on white products.

Necessary materials:

• sodium borate (in common "borax");
• clean cotton fabric;
• water;
• foam sponge;
• soft toothbrush;
• dishwashing gel;
• medical (ethyl) alcohol.

Cleaning technology

1. Remove the mobile phone from the case. Dampen a cotton cloth in water and wipe the protective case.
2. Take a foam sponge, put some dishwashing detergent on the soft side, wipe the cover.
3. Dip a clean cloth in technical alcohol, treat complex contaminants, if any.
4. In cases where stains are difficult to remove, prepare a solution for soaking.
5. Pour dishwashing gel and sodium borate solution in a 2: 1 ratio into a bowl.
6. Dip the cover into the prepared mixture, cover the container with plastic wrap, leave for 1-1.5 hours.
7. At the end of time, scrub the accessory with a soft-bristled brush to remove residual dirt, rinse with water.

Important!
Do not use a hard toothbrush, so as not to disturb the structure of the product. Some types of dirt are removed with a regular eraser (school elastic) or melamine sponge for home care.

Effective ways to clean the silicone case

Do not bring the silicone case to a deplorable state; clean it once every 7-10 days. Stubborn stains are extremely difficult to remove, while removing fresh contaminants does not require much time and effort. Before using the composition you like, try cleaning the product with soap or a damp alcohol-based wipe.

1. Professional stain remover. Use bleaching agents that lack chlorine. Before buying, carefully read the “Composition” column for compliance with this requirement. Next, distribute the required amount of the drug on the surface of the cover on both sides,Wait 5-10 minutes (exact exposure time is indicated in the instructions). At the end of all manipulations wash the accessory with running water.
2. Baking soda. Make a paste from baking soda and water. In the end, you will have an effective composition with sparing (fine) abrasive particles. Scoop a little of the money on the foam rubber sponge, spread it on the places of pollution, wait a quarter of an hour. After the expiration date, rub the cover with a sponge, wash it off with water. If necessary, repeat the procedure.
3. Clean gasoline. To clean the silicone case, you can use pure gasoline, which is used for refilling lighters. Also suitable composition with a relatively high octane number (AI-95, AI-98). Dampen a cotton pad in it, wipe the surface of the accessory. Pay due attention to complex contaminants. At the end of the manipulation, treat the product with ammonia or lemon juice to eliminate possible odor. A similar scheme is carried out cleaning with kerosene.
4. Nail polish remover. The composition, universal in the characteristics, is suitable for cleaning of transparent silicone covers.It is not recommended to treat with the solution colored and colored accessories to avoid pigment fading. Choose a drug without acetone, before use, carry out a preliminary test on an invisible site. With regards to treating the entire surface of the cover, make it moistened with a cosmetic swab and cotton buds.
5. Toothpaste. Cleaning technology designed for transparent and white covers. Moisten the accessory with running water, apply a small amount of paste to the surface of the product. Rub the composition with your fingers. Wait about 10 minutes, then use a toothbrush to better remove dirt. After the procedure, rinse the cover with warm water to avoid the appearance of stains.
6. Lemon acid. The method relates to extreme types of treatment, is highly effective in the fight against stains and blackening. Dissolve 1 bag of citric acid in boiling water, wait until the crystals completely dissolve. Then moisten the cosmetic sponge and wipe the silicone case. If the pollution is not immediately removed, wait 5-10 minutes. When acid corrodes dirt, remove residue with running water.
7. Ink remover. The stationery store sells a drug that helps to remove stains from ink, pens, felt-tip pens from clothing and furniture upholstery. Take advantage of this. Moisten the cosmetic sponge in the solution, wipe the case on both sides, leave for half an hour (the exact time is indicated in the instructions). After that, wash the accessory with running water, repeat the steps again if necessary.
8. Bleach. The use of bleach as a cleaning agent has a negative effect on the condition of the product. The cover can get a pronounced yellow shade, the material will become rigid, due to which it will begin to crumble. It is also possible that the opacity of the accessory (in the case of colorless products), the loss of brightness and brilliance. To carry out the procedure correctly, put on rubber gloves, moisten a cloth in a bleach (“Domestos”, “Vanish”, “Boss”, etc.), then wipe all the necessary areas. After the product acquires its former appearance, immediately rinse it with water.

Important!
To avoid affecting the silicone base of aggressive products, try not to carry your smartphone in a pocket of denim clothing that quickly paints the surface.

It is easy to clean the silicone case, if you have practically knowledge of effective means. Use citric acid, ammonia, gasoline or kerosene, toothpaste, nail polish remover, professional bleach.

Video: how to clean the Smart Cover