How to clean the gold chain at home

The content of the article

1 Dentifrice
2 Vaseline and chalk
3 Sprite and Sea Salt
4 Tar soap and chamomile
5 Baking soda
6 Table vinegar and salt
7 Ammonia
8 Video: how to clean gold at home

After prolonged wear, the gold chain loses shine. This is because sweat particles and dead skin cells are deposited on the links. Also, there are cases when a cream for neck and décolleté, hairspray, perfume gets onto women's jewelry. In combination with dust, the chain is exposed to a raid that is difficult to remove on its own if it does not have sufficient knowledge.

Dentifrice

Get in the hardware store tooth powder (cost about 20 rubles). Prepare the mixture as follows: mix 40 grams. powder with 20 ml. filtered water, mix. As a result, you should get a thick wet mixture, otherwise bring the mass to this state by adding more water.

Dial the composition on a soft toothbrush with a smooth bristle,place the chain on the palm, process one side first, then the other. The larger the composition, the more effective the cleaning. The disadvantage of this method is low efficiency, a toothbrush can leave microcracks, and the powder does not completely remove dirt. If you have a professional whitening paste, better use it. The cleaning procedure is identical.

how to clean gold jewelry

Vaseline and chalk

The method is suitable for the regular prevention and cleaning of the gold chain, subject to weekly use of the composition. Otherwise, the result will be incomplete, in hard-to-reach places there will be dirt mixed with cosmetics and sweat particles.

Get natural chalk, grind it into powder so that it turned out 35-40 grams. Add to it 25 ml. filtered boiled water, 20 gr. vaseline Take 1/10 part of household or tar soap, rub it on a fine grater, add to the composition. If the mass turned out to be dry, dilute it with boiling water. Put the tool in the microwave, heat 30 seconds.

Scoop a little of the resulting paste on a flannel scarf, wipe the chain well.If the result was insufficient, use a soft bristled toothbrush. At the end of the manipulation rinse with boiling water and remove excess vodka.

Sprite and Sea Salt

Many clean the gold with Coca-Cola, but it contains a lot of dyes, unlike Sprite, so the latter is preferred. Pour into a glass of 300 ml. carbonated drink, add 50 gr. shallow sea salt and mix to dissolve the crystals. Dip a chain into the solution, wrap the glass with cling film or cover, wait a day. At the end of time, rinse the jewelry with clean water and dry naturally, laying it on a soft cloth.

Tar soap and chamomile

Buy in a pharmacy daisy flowers, take 55 grams. plants and brew 200 ml. boiling water. Leave for 1 hour, strain several times, otherwise the grass particles will fall into the holes between the links. Now cut a piece of tar soap from a bar about 1.5 cm wide. Grate it, put it in the broth and heat it in the microwave. Stir, wait until complete dissolution of the granules.

Put the chain in the mixture and leave for 2-3 hours.After the expiration date, you can wipe the product with a soft, lint-free cloth, or treat it with a toothbrush and dry it naturally. If desired, you can replace tar soap with household soap, dishwashing liquid or hand-washing powder. In all cases, the main thing is to remove the remnants of the funds so that there is no remaining flight.

how to clean old coins at home

Baking soda

Take the enameled saucepan, pour in 1.5 l. filtered water, add 300 gr. baking soda. Bring the composition to a boil, reduce heat, wait until the crystals completely dissolve. Prepare a cotton bag, put a chain in it so that there is enough space inside for its movement and friction on the fabric.

Put the bag in the pan, it should not touch the bottom or walls of the container. If necessary, double the number of components, if it helps to carry out the procedure correctly. Boil the chain in the bag for about 40-60 minutes, periodically pour water with soda at the rate of 5: 1. Toward the end of the period, take the chain and put it in the pan, turn off the heat, wait another quarter of an hour.After that, rinse the jewelry with boiling water, put it on a dry cloth and let it dry.

Table vinegar and salt

Mix 45 gr. crushed edible salt with 110 ml. of vinegar, mix the composition with a wooden spatula. Add 350 ml. boiling water and wait 20 minutes. At the end of time, place the chain in the solution, leave for 2 hours, then rinse and wipe with pure vinegar.

Ammonia

In order to effectively clean light scurf and add shine to the chain, dilute 5 ml. ammonia 250 ml. warm boiled water, pour 50 ml. Dishwashing detergent thick, mix well with a wooden or plastic stick. Place the jewelry in the container, wrap the neck with cling film and wait 2.5 hours. After that, rinse the chain with boiling water. In cases where contamination is too strong, leave the product for 4-5 hours, then rinse with water.

If these options do not give 100% of the result, prepare a new solution: mix 15 ml. ammonia and 8 ml. hydrogen peroxide solution, the concentration of which varies from 3 to 6%. Leave the chain in the resulting solution overnight, be sure to cover the container with a film or a lid. At the end of the action carefully rinse the decoration first with boiling water, then with warm filtered water.

It is possible to clean the gold chain from the old plaque and oxide by home methods, it is not necessary to contact the jeweler for help. To do this, it is enough to use table vinegar, soda, sea salt, a mixture of chalk and vaseline, tooth powder. Whatever the method, always rinse the product after processing.

how to quickly clean silver