The content of the article
Gold jewelry is constantly in contact with the body, so a layer of sebum appears on them. Accessories made of noble metal are covered with dust, become dull and lose their attractive appearance. You can return the rings and chain shine, you can clean the bracelets and earrings of dirt by yourself, using the available ingredients.
Sweet and salty solutions
Over time, jewels become covered with dark spots, which ordinary sugar will relieve. Dissolve 2 pieces of refined sugar or 2 tablespoons of regular sweetener in a glass of warm water. Stir the liquid thoroughly so that no sugar crystals remain on the bottom. Immerse dim gold jewelry in syrup. They must be completely under water.
It is advisable to use a jar with a plastic or iron lid.Leave the container on the table for 12–15 hours, then shake thoroughly several times, rinse under a tap, and dry on a soft napkin. Earrings will shine, as if only removed from the window of a jewelry store.
Sugar relieves only darkening, but with fat and dirt, he can not cope. It is recommended to try to clean the accessories with salt. Pour two spoons with a slide into a glass of warm liquid and stir until the ingredient is completely dissolved. Earrings and chains should stand in salt water all night. In the morning, you can clean the jewelry with a soft brush, and then wash off the remnants of the solution and dry the gold products.
A mixture of water and lime will help to breathe new life into old rings. Components to connect, to get a thick gruel. Pour a pinch of soda and the same amount of salt. Infuse paste for 5-6 days. Immerse jewelry in the tool for 3-4 hours, remove and gently rub with a soft cloth. Under the faucet, and on the towel, to excess moisture glass. Accessories from noble metal after such procedures look better than on the day of purchase.
Ordinary chemistry
In the house there will be a tube of pasta, a bottle of shampoo or dishwashing detergent.Any of these components is suitable for cleaning gold products. It is undesirable to use tooth powder that scratches the surface of the decoration, and laundry soap.
Dissolve detergent or shampoo in cold water to form an aromatic liquid with a small amount of foam. Armed with a small saucepan or iron plate, making the bottom of the tank with a piece of cloth. Put dirty rings and chains in the prepared dish, pour soapy liquid so that it completely covers the accessories.
Suitable for the preparation of a solution of liquid or solid soap, which should be turned with a grater in small chips. Shampoos are best to use neutral, do not take money "Two or three in one."
Send the pot of gold and soapy water to a slow fire. Boil decorations for about 20 minutes, maximum - half an hour, so as not to damage the accessories. Drain the liquid, wait until the noble metal has cooled, and proceed with the cleaning. First, wipe the products with a soft cloth, and then work on the grooves, grooves and other ornate decor elements with a soft bristled toothbrush. It remains to rinse the gold and dry.Brush put in a box until the next procedure, you can not use it to clean your teeth.
Tip: Jewelery that has become slightly soiled is not necessary to boil. It is enough to hold them in a hot soap solution for 4 hours, pour in a teaspoon of liquid ammonia, and then treat hard-to-reach places with a brush.
Soda can do anything
You should not listen to the advice to treat gold with a mixture of soda and vinegar. Acid damages the surface of the jewels, and due to the hard component small scratches appear on their surface.
Soda is suitable for preparing a solution. Place accessories in a pan with a napkin at the bottom. Water should cover the jewelry, put a spoon of soda and detergent in it. You can limit the dry ingredient.
Boil goldware for 10 minutes, putting on a slow fire. Carefully wipe the jewelry with a cloth, rinse and dry. Gold can be soaked, not boiled. Cover the bottom of the pan with foil, prepare a soda solution and pour over the accessories. They should stand in the tank for 14 hours, after which it is necessary to get rid of the remnants of the cleaning agent by rinsing the jewels under the tap.
Pharmacy help
Strong pollution removes ammonia.The main thing is that there are no inserts in gold that are sensitive to this agent. It is good if silver, nickel or copper is present in the jewelry.
The first way is simple: moisten a cloth or a cotton swab in the salmon, wipe the gold items, and wash the residue with clean water. Instead of alcohol, vodka or gasoline will do, but they do not like the last component because of the persistent and strong smell.
The second option with ammonia is more difficult, but the result is more effective. It will take an incomplete glass of boiling water plus a teaspoon of ammonia. Combine with 30 ml of liquid soap or 20 g of laundry detergent. Stir to dissolve components in liquid.
Darkened or coated with embellishment should be immersed in a container with ammonia, and left for 2-4 hours. Bare hands to the gold accessories is better not to touch. Wear rubber gloves or gently pour them into a colander, and substitute under running water. Rinse for 5 minutes to wash off the whole sal ammoniac, and then dry on a soft towel.
You can prepare a cleaning composition of peroxide, liquid soap and ammonia. At 5 ml of each ingredient in a glass of warm water.Mixed preferably in a ceramic or glass container, suitable and plastic, but no metal. Immerse the gold in the solution for 15 minutes, then thoroughly wash the residue and blot with a napkin.
Salt ammonia mixed with water will cope with heavy pollution. 25% alcohol and 75% distilled liquid. Leave the decorations on all night. You can connect in equal parts ammonia with water and peroxide. Keep for 12 hours, rinse under the tap, wipe with a special napkin.
Borax and iodine spots
Iodine fell on the gold ring, leaving an ugly ginger spot? It should be purchased at a pharmacy solution of borax, dilute it with water. On the part of the chemical means three or four parts of the liquid. To moisten in the received structure a woolen rag, to rub a stain until it disappears. If it does not help, you can increase the concentration of the solution.
An alternative is sodium thiosulfate, which can be purchased at a pharmacy or a store for photographers. A teaspoon of liquid diluted with 200 ml of water, immerse the precious products in the solution for 25 minutes. If the stain has not disappeared, you should contact the jewelry workshop.
People recommend
- Return the glitter of gold can a mixture of egg white and beer. Beat the ingredients into a homogeneous mass, apply to the tarnished areas. Wash off after 20 minutes, be sure to rinse with water.
- Running cases require emergency measures. A cola that corrodes rust will do, so it’s two-fold with dirt and grease. Hold the jewelry in sweet soda for about 30 minutes, then under the running water, and they again look like new.
- Rub gold chains and rings with a crumb of white or rye bread, rub with onion juice.
- Use for cleaning fluid intended for the storage of contact lenses. In the evening, put the jewelry in the tool, and in the morning get it, brush it and rinse.
- Prepare a special paste consisting of grated chalk, soap chips with petroleum jelly and water. You should get a thick gruel, which is treated with gold accessories.
Jewelery with stones
White gold is suitable remedy, consisting of ammonia, clean water and shampoo. Toothpastes and powders, no brushes and hard sponges are prohibited.
Care for precious metal jewelry is not hard. If you regularly wipe them with a damp cloth or special wipes, you will not have to look for recipes for means of plaque and old dirt. People who do not trust folk methods can buy gold paste at specialized stores or entrust jewelery to professionals.
Video: how to clean gold and silver at home
To send