How to use a stamp for nails

The nail industry is constantly evolving. Each season, experts invent practical and fast ways to create a pattern on the nails. One of the interesting devices is considered a stamp. It allows you to transfer the image to the plate for the minimum time, while maintaining the clarity and structure of the ornament. Despite its popularity, many girls do not know how to use a stamp for nails. In order to properly conduct the procedure, it is necessary to adhere to the basic rules and follow the instructions clearly.

The choice of stamp for nails

1. The process of transferring the picture on the nail through a special stamp is called “stamping”. The technology originates in South Korea, it was the local masters of the company “Konad” that began to supply the decor device to the shelves.
2. To date, stores are filled with a large number of sets, so choose the right is not difficult. Better specimens have a high cost.
3. During the purchase, examine the price range. Fixtures made in China are much cheaper. However, their quality leaves much to be desired. If you need a stamp for 1 time, you can buy a similar model.
4. Remove the metal disc with pictures from the package. Pay attention to the contour of the ornament, with good adaptations, it is clearly visible. At the same time, the stamping itself has enough depth for the penetration of varnish.
5. On the disk with pictures, there should not be any visible defects, scratches or any other kind of damage. Chinese manufacturers make poor-quality plates with patterns. Their edges are not sharp, so there is a chance to hurt your hand.
6. Inspect the stamp itself. Its surface is usually smooth, dense and elastic. Too “loose” copies will not ensure uniform transfer of the pattern from the plate to the nail. As a rule, when using low-quality devices, the contour is blurred.
7. The kit also includes a scraper, which removes excess varnish from the patterned plate. If the free edge of the scraper has a notch, you damage the disk, further decorating will become impossible.

Tools for decorating nail stamp

1. Complete with a stamp there is a disk from metal. As a rule, it has 4-8 prints. You will need a plate on which the drawings correspond to the existing idea of ​​nail decor.
2. In the process, you need to remove the varnish from this disk. Manipulations are carried out by means of a special scraper - a scraber. It comes in the kit, so the device does not need to buy for an additional fee.
3. You will need the stamp itself. The head of the main tool should be moderately tight and elastic.
4. You will also need a base under the base layers (colorless varnish), finish, varnish-base and varnish, contrasting with it. If possible, choose acrylic lacquers designed for stamp decoration.

Technology of use of stamp for nails

1. First of all, you need to prepare your nails for subsequent manipulations. To do this, prepare a bath on the basis of chamomile, add a little soda and sea salt. Dip your fingers, wait a third of an hour.
2. After the specified time, wipe your hands with a towel. Move the cuticle to the base of the nail bed.Cut it off with tweezers or a trimmer. Give the nails the required size, adjust the shape with a glass file.
3. Remove the old varnish with a special liquid. Wash your hands with antibacterial soap, treat them with an antiseptic (peroxide, alcohol, vodka, etc.). Wait until the nails are completely dry.
4. Apply the first base layer under the lacquer, such a stroke will prevent damage to the plate. Now distribute the main color on the nails, on which the ornament of a contrasting shade will be shown in the future.
5. Prepare a disc for work, it comes with a stamp. Choose a pattern that you want to transfer to the nails. Distribute the second lacquer according to the picture (contrasting tone). Wait until the entire cavity is saturated.
6. Take the scraper (scraper), walk them on the metal disk, collecting the remaining varnish. You will see that part of the pigment lingers in the cavity of the plate.
7. Carry out the manipulations carefully, the scraper blade should be directed to the disk at an angle of 40-45 degrees. If you do not have a scraper, you can similarly manipulate the old plastic card (discount, debit, etc.).
8. Some kits require a disc holder in the kit.The fixture fixes the plate, so when using the scraper the disc does not go from side to side. This feature allows you to achieve the desired result, excluding damage to the plate.
9. Take a stamp, make sure your hand is firm. One precise movement, press the head of the device to the selected pattern. Wait 3-5 seconds to transfer the varnish to the instrument. Rate the result, the picture should be clearly and vividly printed.
10. If everything is in order, start transferring the ornament to the plate. Press the stamp to the surface of the nail blocking movement (first the first edge, then the middle, the second edge). All manipulations are carried out slowly, in one step.
11. Wait some more time. Take a cotton swab, moisten it with a nail polish remover. Wipe okolonogtevogo roller, if you get it dirty. Now wipe with acetone stamp, scraper and plate, removing the pigment.
12. Similarly, make the design on other nails, including the legs (optional). You can combine drawings with each other by wiping the stamp after each ornament transferred to the nail. When all the fingers are decorated, cover your nails with one layer of finish, dry.

Practical recommendations

1. Choose a dense and rich varnish to fill the cavity of the disk. You need to transfer the drawing from the first time. The composition should not be too liquid, otherwise it will flow out of the stencil, smearing on the stamp. Also, lacquer should not be too thick. In this case, it will not fill the engraving cavity, leaving gaps in the figure.
2. Act scraper very quickly. If the pigment dries, it will leave a bulge in the figure. After covering the finish line the final result will look ugly.
3. When you begin to transfer the pattern on the nail, keep the stamp in an upright position. Position the fixture perpendicular to the plate surface, then apply pressure. In the process of transferring, slightly rotate the stamp with pendulum movements.
4. Before you buy, evaluate the quality of the rubber stamp head. It should not be too rigid or, on the contrary, soft. The first option will provide only partial transfer. The second tool will smear the ornament.

Choose a good stamp for nails. The kit should include a metal plate with the patterns you like, as well as a scraper for removing varnish residues from the engraving cavity. Before decorating prepare your nails, make a manicure.Hold the stamp vertically, make sure that your hand does not falter before applying the pattern.

Video: how to use stamping