How to wash laminate without stains: useful tips

It may sound ridiculous, but it is extremely difficult to wash the laminate without stains. Properly performed procedure guarantees you a brilliant finish and well-groomed appearance, because the floor sets the tone for the whole room. However, the violation of technology leads to the formation of white spots, the laminate becomes dull, ugly. To avoid this situation, it is important to adhere to practical recommendations with regards to the choice of cleaning agent and carrying out wet cleaning in general.

Wet cleaning technology

Practically in all modern apartments and houses the laminate is laid. The problem of wet cleaning becomes especially urgent in those rooms that are continuous.
It is difficult to wash the coating without streaks for the reason that running water contains a lot of alkali in its composition, which in combination with cleaning agents gives the same whitish tint.

1. To prevent the appearance of light streaks, neutralize the water with table vinegar. Prepare a solution: Pour 550 ml. composition of 2.5 liters of running water, mix.
2. When the cleaning agent is ready, pay attention to the tool with which the cleaning will be carried out. You will need to purchase a special mop with microfiber, which has an adjustment lever for more gentle cleaning. Important! Old t-shirts and other fleecy rags cannot be used as a tool. This is especially true of colored products, they make the surface dull. The advice applies not only to cleaning the laminate, but also to linoleum and parquet.
3. After all preparations, rinse the soft mop head with water, squeeze, dip into the solution, wait 3 minutes. After the expiration date, remove excess water, proceed to washing the coating. Perform the procedure with the windows open so that no puddles and wet spots are formed on the floor.
4. Your mop motions should resemble a snake. You can also move from one wall to another, but then the mop should go parallel to the laid laminate panels.After completing the wet cleaning, do not close the windows.
5. In cases where large puddles form on the surface, they must be removed before the floor begins to dry. Wipe the laminate with a lint-free cloth and, if possible, walk on the surface with a practically dry mop. Such a move must be made to prevent the appearance of stains and swelling of the panels.

Important!
Do not use rags or sponges with hard elements (embroidery, buttons, seams, etc.) to clean the laminated covering, as they leave ugly stripes. In addition, treating the floor with a coarse brush, you risk leaving microcracks on the laminate flooring, which under the influence of water will “crawl”.

The choice of detergent for cleaning laminate

The main feature of caring for the coating is that it is necessary to use only special products marked “for laminate”.

Important!
When laying laminate, consult with a specialist what cleaning agents are allowed to wash the coating. Many drugs are inherently extremely aggressive, they can lead to deformation and bloating of the panels.

1. "Mellured Bio". The tool copes with pollution of any kind, suitable for cleaning the laminated coating after the repair. The special composition smoothes scales and forms a kind of film that repels moisture.
2. "Mister proper". Budget option, which has found approval from the Russian hostesses. In addition to cleansing the coating from dirt and dust, the product has a pleasant smell, which gives the room freshness.
3. Emsal Laminate. Designed for the laminated coating composition refers to the preparations of the luxury class. It is suitable for expensive parquet and tile, because it leaves no stains at all. The main advantage is considered efficiency, one bottle is enough for 3-4 months of regular use.

Recommendations for wet cleaning laminate

Practical advice will help to achieve a well-groomed appearance of the coating and extend its service life.

1. Do not use detergents with abrasive particles to clean the coating, so as not to disturb the structure of the panels.
2. Do not do wet cleaning with the use of chlorine-containing products and ammonia,since these components destroy the protective (lacquer) layer.
3. Before starting to wash the coating, make sure that there are no small stones, sand grains and crumbs. It is recommended to sweep the floor.
4. Give preference only to the means "for laminate", refuse to purchase compositions for tiles or linoleum.
5. It is important to understand that high heat treatment has a detrimental effect on the condition of the coating. For these reasons, do not use steam cleaners; under the influence of temperature, moisture clots will penetrate into the gaps between the panels, which will inevitably lead to swelling.
6. Avoid the use of cleaning products, which include alkali and acid. Advice is extremely relevant if your laminate has a glossy surface.
7. For final processing of the laminated coating after washing, purchase a microfiber cloth. It will prevent the formation of divorce.
8. Before you prepare a solution of the selected detergent and water, read the instructions. Do not exceed the amount specified by the manufacturer, otherwise you will not be able to avoid white marks.
9. The recommended frequency of wet cleaning of the room varies within 2-4 times a week, it all depends on the room's permeability.
10. If you do not have the opportunity to purchase funds for laminate, buy liquid soap for children or dissolve a third of the economic bar in the pelvis.
11. Do not forget to add table vinegar to the water, which you plan to wash the floors. If desired, it can be replaced with medical alcohol, vodka, citric acid, reducing the amount by half.

How to wash the laminate after repair

It is not uncommon for the surface of the laminate to get dirty after repairs. To avoid this situation, follow the instructions.

1. Remove large pieces of garbage, sweep the cover with a broom, collecting dust and dirt.
2. If there are traces of polyurethane foam or paint on the laminated coating, remove them with cleaning agents containing ethyl alcohol or acetone.
3. To get rid of adhered building materials, pour a small amount of the compound onto the stain, wait for about two minutes, remove the residue with a soft microfiber cloth.
4. If gaps or scratches form on the laminate after cleaning, mask them with a wax pencil and rub well.
5. Complete the procedure by washing the floors, moving the mop from one edge of the wall to the other.If necessary, perform a wet cleaning 2-3 times using professional cleaning products.

With the advent of laminated coatings, popular manufacturers began to produce a series of products specifically for floors of this kind. In addition to the excellent cleansing properties, the drugs serve to protect the surface and give shine, due to which the laminate does not tarnish and does not change the shade. Perform wet cleaning according to the instructions, follow the recommendations.

Video: how to wash laminate without streaks in minutes