How to bring nails in order at home

Hands are always in sight, so they should be well-groomed and perfectly clean. If, in the case of a face, minor defects can be masked by correct application of cosmetics, then burrs or yellowed nails cannot be hidden. For this reason, many girls wonder how to quickly bring the nail plate in order and what is required for this. Let's look at the basic methods and highlight the stages of cosmetic procedures.

Stage number 1. Bleaching and cleansing

1. To carry out the manipulation, arm yourself with an old toothbrush of medium hardness. If there is dirt under the plates, it is necessary to make a bath.
2. For its preparation you need 20 grams. ground sea salt without fragrances, a container with water at a temperature of 40-45 degrees, glycerin or tar soap, 30 ml. lemon juice and a towel.
3. Lemon fresh in combination with salt acts as a powerful bleaching agent. Nails quickly become white and acquire the necessary strength.
4. Mix 1.5 liters. warm water with a small amount of liquid soap or tar chips, add lemon juice and salt. Wait until the solution becomes homogeneous.
5. Dip your fingers in the composition and hold them for about 20 minutes. If necessary, you can periodically pour hot water. After a while, rub your nails with a brush, wipe your hands with a towel, proceed to the next step.

Stage number 2. Steaming and moisturizing

The second stage is no less significant. To properly prepare the nails, it is necessary to steam the skin around them and nourish it with additional components. Baths, paraffin or masks are used for this purpose.

1. Lemon juice with linseed oil. Heat 50 ml. oil in a water or steam bath, enter 10 ml. lemon juice. Pour this composition into 500 ml. warm water, you can enter 1 ampoule of tocopherol or retinol. Dip your fingertips, wait a quarter of an hour. Then do not wash your hands, start the next step.
2. Glycerin with flour. Combine water with glycerin in an equal ratio, taking 50 ml. each composition. Pour 20 gr. sifted flour and mix thoroughly. Send your fingertips inside, wait 10 minutes. Then massage the skin around the plates, wash off the product with warm water and begin further manicure.
3. Yolk with honey. For the procedure, choose a thick candied honey, you need 30-35 grams. Combine it with the quail egg yolk, add a little flour or bran for density. Apply to the steamed skin around the fingers, massage, wait a third of an hour and rinse.
4. Mayonnaise with coffee. If desired, mayonnaise can be replaced with sour cream, but the first option is preferable. Mix 20 gr. coffee grounds with 30 gr. The second component, apply on fingers and massage the cuticle. Then wait another 10 minutes, wash off with soap.
5. Medicinal plants. For the purpose of steaming and moistening, you can use herbs that are sold in a pharmacy. It is preferable to prepare a decoction of chamomile or nettle. Dip the handles into the warm solution, wait 20 minutes, wipe off with a towel.
6. Oil and glycerin. Need to connect 60 grams. oatmeal, 50 ml. glycerin, 30 ml.sunflower oil, 15 ml. lemon juice and 35 ml. hot water. Get away from the homogeneous components. Apply the product on your hands and wait a quarter of an hour. Remove and moisturize fingers cream.
7. Paraffin. The composition has a positive effect on the state of the nail plate, strengthening the structure. Before the procedure, paraffin must be melted on a steam bath. The temperature should be acceptable so that you do not scald your skin. Dip your hands in the composition and reach. Wear special gloves. Wait a third of the hour. Wash off with soap and treat your hands with cream.

Important!
At this stage, you need to steam and moisturize the skin of the hands, in particular the cuticle. We recommend first making a bath, then a mask or paraffin gloves. Such a sequence will maximally prepare the fingers for the treatment of the cuticle.

Stage number 3. Cuticle processing

1. After holding the directional masks, you need to proceed to the removal of the cuticle. The procedure is quite simple, as the skin softened. Move the cuticle with an orange stick, then cut it with a handy tool.If skin is damaged, treat the areas with an antiseptic.
2. After moisturizing nail treatments it is recommended to wait a few minutes. Such a move will allow you to better see where you need to cut the keratinous skin. Pay due attention to the rough dermis under the nails. The skin can easily be cut with nail scissors.
3. It is forbidden to resort to the help of special means to remove the cuticle. Otherwise you will dry the skin. If the cuticle has grown strongly, it is enough to move and remove it.

Stage number 4. Plate shape correction

1. To correct the form, it is enough to use a professional nail file. If the branch has long nails, you can remove the excess with scissors, then file it.
2. Experts recommend using a glass file with dusting. As a result, you will not face the problem of exfoliation of the nail plate. Next, polish the surface with a buff. You can apply varnish.
3. If you have enough time, then nail design can be approached from the creative side. You can come up with a drawing or resort to using special stickers.
4. To significantly reduce the time of the procedure, if you are a busy person, you can use a little trick. After steaming, move the cuticle and side rollers back with an orange stick. Correct the shape of the nails and rub special oil with rose extract into the surface. Wait a third of the hour.

Each girl leads a household, from which the nails often turn yellow, and the skin absorbs various coloring matter. It is necessary to cleanse, moisturize, nourish the skin around the fingers with further trimming the cuticle and adjusting the shape of the nails.

Video: how to make a manicure at home