How to clean the toilet from blockage at home

Residents of private and apartment buildings often face the problem of clogging the toilet. In such an unpleasant situation, many reasons associated with both improper operation and poor installation. But, no matter what causes the clog of the toilet, the main thing is to be able to quickly remove it.

This article will help. It describes the main causes of sewage pollution. Provides effective ways to deal with them, as well as useful tips on how to prevent blockages.

Signs of clogged toilet

There are primary signs that signal the contaminated state of the sewer system. If you observe at least one of them, it is an occasion to immediately begin to eliminate the blockage, without waiting for the problem to worsen.

• filling the toilet bowl with sewage returned;
• the slow passage of water through pipes into the sewer;
• the smell of sewage.

What clogs the toilet

The toilet clogs with time. Like any other plumbing device it is required to periodically clean it. To do this, it is necessary, if possible, to determine why a traffic jam has formed. Clogging of the toilet bowl occurs for the following reasons:

1. Incorrect installation. The cause of the blockage is often an improperly installed drain system. The sewage pipe has a small angle of inclination as a result of which waste is poorly washed off. They linger and gradually accumulate, completely clogging the system.
2. Organic waste. In the toilet often wash off various foods. For example, remnants of porridge, potato peelings, seeds, apple cores and much more - the list can be listed for a long time.
3. Household trash. A third cause of clogging is household pollution, such as broken glass, office supplies, paper, bags, and more.This happens when the toilet is used as a garbage can.
4. Filler for cat tray. Modern fillers for animal toilets are made of bentonite, a special clay that absorbs moisture and retains it. Once in the toilet, clay lumps stick together, forming a tube in the channel.

Methods for cleaning the toilet bowl

Depending on the type of contamination, different methods of cleaning the toilet bowl are used. In order to return the drainage system to the drainage system at home, they use two main methods:

• mechanical;
• chemical.

Serious blockages will be removed only by mechanical means. To cope with a little pollution, apply various chemicals. Decide which method to use after determining the cause and complexity of the blockage.

Mechanical methods for removing blockages

Mechanical methods of cleaning blockages are used most often. Such work is done independently, without the involvement of professional plumbers. For cleaning use a variety of mechanical devices.

Vantuz
The most common tool that is available in every home. It will help to cope with a shallow blockage. Best for the toilet fit plunger, which has a special cone on the rubber nozzle.

Application: To use a plunger, it is necessary to fill the toilet with water by about one third. The tool is installed on the drain hole so that its edges overlap the drain as much as possible and tightly adjoin the surface of the toilet bowl. Then reciprocating movements of the handle, you must create pressure in the drain to break through the blockage. The procedure is repeated until the congestion is completely eliminated, until the water starts to leave quickly.

Plumbing cable
To eliminate blockages often used plumbing cable. This is a long cable that bends easily. At one end of the instrument is a handle (knob), and at the other end there is a special metal brush. Plumbing cable may have different lengths. It is very convenient for them to clear deep blockages of a sewer pipe. But in most cases, one meter of length is enough to clean the toilet.

Application: Insert the cable into the toilet drain hole and push it as far as possible.The tool has a handle, rotating which will make it easy to overcome the bends of the drain system. Reach the blockage, punch it. Clean until the water from the toilet begins to quickly leave, carrying residual dirt into the sewer system. After removing the blockage, clean the drain by rinsing it abundantly with hot water and adding detergents.

Chemical methods for removing blockages

To eliminate light blockages, use a variety of chemicals. On the shelves you can find a whole arsenal of chemistry. These substances are in the form of powders, liquids and granules. They help to clean the toilet well without damaging the drain system.

Soda and Vinegar
The simplest and most affordable chemical that can eliminate clogging is regular baking soda and table vinegar. For cleaning you will need to buy a pack of soda and one bottle of seventy percent, vinegar.

Application: First, scoop up the excess water, leaving a little in the sink. Then put half a pack of soda in the toilet and push it as deeply as possible. Pour a glass of vinegar on top and wait 15–20 minutes for the reaction to complete.To improve the effect, use hot water. Pour it into the toilet and the clog will disappear faster.

Pipe Cleaners
These substances can destroy, formed from grease, salts and other contaminants, congestion in sewer pipes. Depending on the type of pipes and the complexity of the blockage, you can choose imported or domestic products. Imported chemicals are suitable for any pipes (plastic and metal), and domestic for metal.

Popular foreign-made cleaners are: Domestos, Mr. Muscle and Tofix. These tools are suitable for all types of pipes. They will carefully eliminate clogging, as well as unpleasant odors.

From domestic products in demand are: "Ruff", "Chimney Sweep" and "Mole". These cleaning products are great if the toilet is clogged. But do not forget that they can erode not only the blockage, but also the walls of pipes.

Application: Read the instructions and, in compliance with the dosage, pour the pipe cleaner into the toilet. Then add the required amount of hot or cool water. Leave the cleaner for 1.5–2 hours. After the specified time has elapsed, flush the toilet with hot water.

Prevention of blockages

1. Do not use the toilet as a garbage can. The garbage thrown at it will certainly lead to a complete clogging of the sewer pipe.
2. Periodically clean the toilet seals, using chemical means.
3. Rinse the system with hot water every week.
4. If your sewage system has a background riser installed, make sure that it works properly.

After reading this article, you now have a general idea of ​​how to cope with the clogging of the toilet sewer system on your own. Eliminating the consequences of careless use is difficult, so follow preventive measures. Try to regularly monitor the state of the drain system. This will help to avoid big trouble.

Video: how to clean the clog in the toilet