How to remove the glue moment with it: useful tips

The content of the article

1 How to clean your hands from glue?
2 How to stick fingers after superglue?
3 How to use glue-moment so as not to stain the skin?
4 Video: how to clean the dried super glue from the hands

Glue "Moment" is a real magic mixture that can solve many everyday problems. “Moment” perfectly connects and firmly glues materials such as glass, wood, plastic, fabrics, paper, leather, etc. It is probably difficult to find a thing that could not be restored after a physical breakdown. But at the same time, glue is a rather capricious tool that, if used improperly, can remain on your hands. Especially if the gluing parts are small, they have to be pinched with fingers with great effort, the glue flows out and cannot be wiped off in time. In most cases, it is possible to eliminate the damage, but a film remains on the fingers, which brings serious discomfort. And most importantly, it is not so easy to remove it. Our article is about how to solve this problem quickly, safely and effectively.

How to clean your hands from glue?

As soon as the glue has fallen on the hands and has not yet fully hardened, it can be removed within a few seconds while the film remains sufficiently soft. If the glue finally crouches, then you should use the following tips.

Anticle. In the hardware stores on the shelves with glue, “Antikley” tubes are sold, which are specially designed for removing and splitting unwanted glue residues on hands, furniture surfaces, etc. If you often use glue, a tube with the back of the current composition should always be at hand. The anti-glue is applied directly to the skin, after which you need to wait a bit for the product to work, and then wipe off the remnants of the glue with a cotton pad and wash your hands with warm water.
Soap solution. Fresh glue marks can be removed with a simple soap solution. Add some liquid soap, dishwashing gel or powder to the hot water. Keep your hands in water for at least half an hour. The skin will quickly swell, suck in the liquid and repel the adhering layer of the gel. Then you just need to rub your fingers with a pumice stone for cleaning the heels - the skin will quickly clear.To combine the pleasant and useful, you can not just keep your hands in the bath, and wash the dishes, wash clothes by hand, etc.

Fat or oil. To soften the hard layer of the dried glue and gently pry it off from the skin will help vegetable oil, for example, sunflower. It is necessary to moisten a cotton pad, attach to the skin affected by glue, wrap a piece of film and leave for 20-30 minutes. After that, wash your hands - part of the glue will move away. You may have to do a few lotions. Instead of vegetable oil, you can use cream, well copes with the problem of any animal fat or vaseline.
Cut down. If the layer of glue is thick enough, you can try to cut it. This will help you at least a little to reduce the layer of glue, and then more effectively use the above-mentioned methods of removing residuals of the “moment”. As a rule, it is recommended to cut the glue only to men, who by nature have skin that is coarser, dry and thick. If the skin is sufficiently tender and thin, cutting can damage the epidermis and compromise its integrity. You can cut the dried glue with a nail file, pumice and emery paper.Be careful not to rush, otherwise remove the glue along with the skin!
Acetone. This tool perfectly eats away glue, it can be used to remove even the most old spots and films. It is much better to use nail polish remover with acetone - there are already emollients in it that do not dry the skin. Moisten a piece of cotton swab in the tool, attach it to the adhesive film and leave it for 5-10 minutes, you can just gently wipe the skin with this solution. If the glue layer is very thick and strong, you need to leave a lotion on the affected skin, and wrap the finger over the top with foil. This will help speed up the reaction. If the nail polish remover is not available, but there is only pure acetone, it should be diluted with water and some glycerin should be added so as not to burn the skin.
Dimexide. This is a simple remedy for external use, it is used to treat wounds, abrasions, cuts, it is very effective to use in the fight against sprains and rheumatism. Dimexide perfectly breaks up the glue, it is enough to make a lotion on the basis of the medicinal liquid. Dimexide, by the way, is sold not only in liquid form, but also in the form of ointment and gel - these funds are much more convenient to use.
White Spirit. It is a solvent for oil paints, varnishes and rubber. In the garage of the hoard owner, there will certainly be this remedy. White spirit perfectly removes glue, quickly splits it and removes it without a trace.
Kerosene. This is another tool to quickly and safely remove glue stains. Dampen a cotton pad in kerosene, apply to skin and leave for some time. Periodically inspect the place lotion - so that kerosene does not burn the skin.
Paint thinner. If you have recently made repairs in the house, you probably still have paint thinner. As a rule, these tools are made on the basis of acetone. Moisten a piece of bandage in the liquid and carefully go through the layer of glue on the skin. After such a treatment, the hands will still emit an unpleasant smell for a long time - but this problem is much easier to cope with.
Salt peeling. Salt is a powerful substance that eats away various masses. In the fight against the dried layer of glue, you need to use sea salt - it dissolves longer, besides large pieces of salt provide the effect of scrub. Prepare a thick slurry of salt and water, apply on the skin with glue, carefully rub the hardened film.After some time, the glue will begin to peel off, and the skin will gradually clear.

If you do not want to risk the condition of your skin or glue, you simply do not bring much discomfort, just leave everything as it is. After some time, the film itself will disappear under the influence of the natural fatty layer, which the skin constantly releases. In this case, it will take you only a couple of weeks for the epidermis to push the foreign area on its own. If you want to speed up the process, try to mess around more in the water - the glue film will gradually soften and move away.

how to remove superglue from your fingers

How to stick fingers after superglue?

Very often when working with glue-moment incidents occur, the consequences of which are not so easy to fix. If your fingers stick together during work, do not rush to pull them apart abruptly - this can lead to serious skin injury, the wound will heal for a very long time. To solve the problem, you need to dial in a basin or a cup of hot water - the highest possible temperature that you can tolerate. Add a couple of tablespoons of baking soda to the water - it softens the water perfectly.Dip the glued fingers into the prepared container and hold until the skin begins to swell. Then carefully, one millimeter apart fingers. It may take about an hour to completely separate the fingers, but you can get rid of the glue without any damage to the skin. Do not try to separate the glue on the fingers with a blade or knife - this is extremely traumatic.

How to use glue-moment so as not to stain the skin?

Any process should be approached responsibly, especially if it is the use of superglue that dries quickly and is very difficult to rub off. Be sure to lay on the work surface paper or film - so you protect the furniture. In no case can not trust the work of children. It is not advisable to constantly inhale vapors of a toxic substance. If you often work with glue of this type - wear a respirator. In order not to stain your fingers, use medical gloves - they are quite thin and do not violate the sensitivity of the fingers, do not interfere with the work. If there are no gloves, do the work with a match or a toothpick - this is especially convenient for small parts. Try not to press the glued parts together, so you risk not only getting your fingers dirty, but also stick to the repaired product.If you often use superglue, think about buying a gun - working with him is much more convenient and safer.

Today, the choice among different types of glue is very wide, with the help of this core composition you can firmly attach two pieces of any material. The main thing is to know how to unplug them back if necessary!

than you can clean your hands from mounting foam