How to remove the smell from the sink in the kitchen

Accepting guests, everyone wants to put their home in a positive light. The unpleasant smell in the kitchen puts the apartment owners in an awkward position. As a rule, the problem arises due to a blockage in the sewer pipe. As a result of this outcome of events water stagnates, food wastes that are not easily removed are stuck. There are several universal ways to help solve the arisen complexity without calling a specialist. Let us analyze actions step by step and highlight important aspects.

 How to remove the smell from the sink in the kitchen

Pipe and Siphon Cleaning

Siphon is a pipe of curved shape, which is located under the sink. It serves as a barrier that prevents unpleasant odors from entering the room from the sewage system. There are 2 types of siphons: barrel-shaped and self-flushing. The first option consists of a removable part, which is easily unscrewed and cleaned, while it does not have to be removed.Siphon of the second type - a curved pipe.

  1. First you need to check the integrity of the pipes. There are frequent cases when the hose is disconnected, a joint or crack is formed, as a result of which the stench penetrates from the riser. To properly conduct the inspection, inspect the connections below the siphon. If you have not noticed any damage, but the fluid in the sink is still draining slowly, the problem is clogged pipes. For the most part, the problem is solved without the help of a plumber; even a single woman can solve the problem.
  2. The simplest way to clean a pipe is to use a plunger. Pour water into the sink in such a way that the instrument niche is covered with liquid. Form a vacuum, then slowly raise and lower the handle. In this case, it is impossible to tear the thicket from the bottom, otherwise all efforts will be in vain. Increase pen speed gradually. Periodically it is necessary to pass the liquid into the drain in order to estimate the rate of water drift.
  3. If you notice that the use of a plunger has proven ineffective, use the purchase means to clean the sewer and pipes.Such compounds dissolve food debris, fatty blotches, solid growths, wool and hair. As a rule, the technology of use is sufficiently transparent, it all depends on the degree of blockage and the interval during which the treatment was not carried out.
  4. Read the manufacturer's instructions on the back of the bottle. Usually the pipes are cleaned as follows: the composition is poured into the drain hole, a certain interval is waited, after which the pipes are washed with water. As practice shows, thick gels are considered as the most effective, and not liquid serums or powders. In this case, clean only with protective gloves, since most of the products are extremely toxic.
  5. In cases where a pipe blockage has formed deeply from the drain hole, use a plumbing string (cable). The tool looks like a long wire twisted into a spiral (spring) to which the handle is attached for ease of use. To properly clean, thrust the cable into the drain hole, start to drive them back and forth to feel the tumor.
  6. Determine whether there is a blockage or not, you can lightly press all the way into something soft.Try pushing the dirt in deep by pushing it vigorously. In cases where such manipulation is impossible to carry out, it is necessary to extend the lump outward with reciprocating movements. The cable will repeat the bend of the pipe, so feel free to thrust it deeper. To increase the efficiency allowed to open the water.
  7. Evaluate the pipe design. If possible, try to remove the siphon and rinse it thoroughly. It is not uncommon for hair, a toothpick, food and other waste that “builds up” on each other in the curved part, and thus forms a blockage. Modern siphons are equipped with a cork, you can unscrew it and clean the cavity without disassembling the structure.
  8. Another option for pipe cleaning is to use a hose with a cone-shaped tip in combination with strong water pressure. This technology has been developed for cleaning small-diameter pipes, such as is installed in the kitchen. For the procedure, skip the device in the drain, pour water into the niche, then close the area around the hose with rags and plastic bags (you can use food cling film). Such a move will not allow water to flow back.You can not use the technique after the treatment of sewage chemicals. If the blockage is strong, under pressure, the water will spill out, taking the cleaning composition with it.
  9. If all of the above methods of eliminating unpleasant odors have proven ineffective, use the following recommendation. Open the water under a slight pressure, listen to the sound of runoff. If you find an incomprehensible gurgle, it means that the water lock is torn off, which prevents the penetration of the stench from the sewer. The reason for this is the vacuum at the base of the riser or the sharp slopes of the pipes and the length of the pipes.
  10. In cases where a corrugated pipe is installed in the kitchen, a blockage may occur because it is unbent. Purchase a new fixture, install it in such a way that the water flows freely and does not stagnate. In addition, such a move will not allow food debris to accumulate on the walls, forming a lump. Twist the corrugation as necessary, fix it with tape or tape.

Folk methods of flushing pipes

  1. Baking soda. The product is able to eliminate the blockage and prevent its further education, if you use the composition 1 time in 7-10 days. Mix in a homogeneous solution 100 gr. baking soda and 300 ml. warm water, wait for the granules to dissolve. Pour the composition in the sink sink, wait about 40-60 minutes. While waiting for the mixture to work, pour water in the basin of 40–45 degrees into a basin or bucket, add 0.5 kg. soda After the expiration date, pour the liquid into the drain. The method is designed more for preventive purposes, but it is also able to cope with small soiling in pipes or siphons.
  2. Table vinegar. Another effective method that eliminates the cause of the stench coming from the sink. Pour into the drain 700-800 ml. solution of vinegar (concentration 6-9%), close the hole with a rag, bag or stopper so that the composition does not volatilize. Wait about 30-45 minutes, during this period the vinegar will corrode all deposits. At the end of time, flush the pipes with two buckets of warm water, if necessary, use a plunger as a supplement.

An unpleasant odor occurs due to clogging of the siphon or a shutter shift. Identify the problem, then try to eliminate it on your own.Use the purchase or folk remedies, plumbing cable, plunger, hose with a tip in the form of a cone. If after all the tried and tested ways you could not get rid of the stench, call a specialist.

Video: we remove the smell from the sink in the kitchen

(No rating yet)
We advise you to read
  • How to dry basil at home

  • How to save basil for the winter: 6 ways

  •  Why pickled ginger pink

    Why is pickled pink ginger?

  •  How to save parsley root for the winter

    How to save parsley root for the winter

  •  What is useful peas

    How is pea useful for the human body?

  •  How to eat root celery

    How to eat root celery

  •  Violet and green basil

    Purple and green basil: what is the difference?

  •  How to save Bulgarian pepper for the winter

    How to save Bulgarian pepper for the winter

  • ...



leave a comment

To send

 avatar

No comments yet! We are working to fix it!

No comments yet! We are working to fix it!

Diseases

Appearance

Pests