How to dry the phone that fell into the water

A few centuries ago, when there were no mobile phones, we did not suffer from such a problem as getting our stationary phone wet. However, time passes, technology does not stand still, and today almost every inhabitant of the planet has a mobile phone. We appear with a cell phone everywhere - on the street, in the pool, on the beach and even in the toilet. And it is not surprising if in this mode he accidentally falls into the toilet, a puddle, if a glass of water is poured on him or he is completely washed in the washing machine.

Many believe that getting a cell phone into the water is equivalent to its complete failure. But it is not. If the phone fell into the water, it can still be saved. In this situation, it is very important to act instantly.

What to do if the phone fell into the water

1. As soon as the phone gets into the water, through the ports of the headphones, charging and other openings, water instantly gets inside.Therefore, the very first thing that needs to be done is to pull the device out of the water. If the cell phone fell into the toilet - you can not hesitate and waste time searching for rubber gloves. Hands can be washed a little later. From the time of your reaction depends on the possibility of saving the phone.
2. After that, the phone must be immediately disconnected. If it does not turn off from the button, simply pull out the battery. Do not attempt to test the operation of the device and do not turn it on when wet. This can lead to the closure of contacts and the phone will simply burn.
3. After turning off the device, try to disassemble it as much as possible. At a minimum, you can remove the battery, memory card and SIM card, remove the back cover. If the phone is not touch, but older models, you can disassemble the device completely, remove the rubber buttons. The touch phone can also be disassembled, but for this you need a special small screwdriver. In general, remove everything that can be removed, but be careful - do not tear off or break some subtle details. If you completely disassemble the device, do not forget that it was removed in what sequence.Better in the process of parsing the phone to take a few photos.
4. After that, take paper towels or dry napkins. Carefully wipe every detail of the phone. Try to reach hard-to-reach places with flagella rolled out of napkins. Do not wrap the tip of a pencil or pen with a napkin in order to get moisture stuck in the corner. It is unsafe for small parts of the phone, besides, it will not bring much benefit.
5. After thorough wiping and drying of all parts of the apparatus with dry wipes, you need to leave the phone for several days. Remember that the phone can not be turned on until it is completely dry. And it may take more than one day.

If you want to speed up the process of drying the phone, this can be done using the following methods.

How to dry the phone

In order for the phone to dry quickly and come to life, it must be placed in an adsorbent composition.

1. Fig. This is the most popular cereal, which quickly absorbs excess moisture. Take a bowl of dry rice and place the phone in there. Fully bury the body, battery and other parts in the rice.Leave overnight. In the morning the phone will be completely dry, and the moisture will remain in rice. Rice dust can be wiped with a cloth or vacuumed.
2. Cat litter. If there is a cat in the house, then there will be no problems with drying the phone. Put the device and its parts in a clean filler, and in a few hours it will draw excess moisture from the phone.
3. Silicogel. Surely you found in the box with the new shoes silicone balls, which are put there specifically to absorb excess moisture. Place the phone in a container with silica gel so that the balls completely cover the device. This is a quick and safe way to dry the appliance.

Is the phone wet

In order to check whether the phone has become wet and whether its components have suffered, refer to the device’s instruction manual. Most modern models have a special indicator that changes color when wet. If in the normal state it is a white square or circle, then in a wet state it is a pinkish spot. It is usually located under the battery in the corner near the charging hole.

If the phone was charged when it was wet, unfortunately it would most likely not be possible to save it.The fact is that during charging, most of the indoor units are activated, which immediately burn out when wet. When removing the phone and the charger from the mains, be careful - water is an excellent conductor of electricity. It may be advisable to disconnect the apartment from the power supply and only then carry out all the manipulations.

Is it possible to dry the phone with a hairdryer or vacuum cleaner?

If you want to use household appliances, use a vacuum cleaner. Put the nozzle on the pipe with a narrow spout and bring it to all the cracks and hard-to-reach places. The vacuum cleaner will carefully pull out all the excess moisture and dry the appliance.

If you drop the phone not into the water, but into the juice, sweet tea or salt water, you do not need to rush to rinse the device under a stream of clean water.It is necessary to dry the cell according to the previous recommendations, and then wipe all parts of the phone with wet wipes.

After the phone falls into the water, do not rush to run after the new device. Soaked phone can be reanimated. If the phone does not turn on after thorough drying, take it to the master. And so that the next time such an incident does not happen, be more careful. After all, sometimes in addition to the expensive device, you can lose photos and video frames of dear and beloved people.

Video: a way to dry the phone