How to remove blood stains from the mattress: 10 ways

Blood on the mattress is an unpleasant discovery for many housewives. When preparing a bed for bed, the stain catches the eye and looks unaesthetic. The problem becomes especially urgent when it is noticed by guests who come to sleep. To avoid embarrassing situations and keep the bed in proper condition, it is necessary to have basic knowledge of care. We have collected for you an effective collection of popular recipes that do not require a lot of time and effort. Consider the current ways to get rid of blood stains.

Preparing the mattress for cleaning

Before proceeding with the procedure, you need to prepare the product. We give a step by step instructions.

1. First you need to blot the place of pollution with a thick cloth. Take a terry towel, soak it in ice water, press it to the spot. Hot water cannot be used because it promotes the penetration of blood deep into the fiber structure.
2. After wet processing, blot the surface with a dry rag, it will absorb the liquid along with the soaked blood. No need to rub the mattress too much, otherwise the blood trail will spread over a large area. Your movements should be driving in.
3. Then again moisten a clean area of ​​the towel with water, repeat the previous manipulations. Complete the procedure at the moment when the contact area on the fabric remains clean after it is soaked with a dry cloth.

Important!
Preparation of the mattress is needed in cases where the blood stain is relatively fresh. In other cases, the above proposed manipulations will be useless, since the dried trail is resistant to water.

Effective ways to remove blood stains from the mattress

Ammonia

With each subsequent time, you must move to the middle, thereby preventing the spreading of the track.If the pollution is outdated, do not rush to get it wet with a rag, soak this part of the mattress in ammonia solution for 10-15 minutes. Cleaning is convenient to complete the treatment with a vacuum cleaner and natural drying.

Brine

The final composition acts on the principle of ice, but at times more efficient. Fall asleep 55-60 gr. crushed edible salt in 250 ml. warm water, stir until the granules completely dissolve. Next, pour the resulting solution into a dispenser vial. Before applying the composition, make sure that the liquid is not warm. For better cooling, place the container in the refrigerator for 40-60 minutes.

Begin to remove stains. Spray on the edge of the blood trail, leave for 10 minutes, blot with a towel in the direction of the center. Gradually move to the middle of the pollution, collect the blood with a dry, clean cloth. Repeat simple actions until the trace disappears completely. As in the previous method, collect moisture first with a dry towel, then with a vacuum cleaner.

Laundry soap

The product is considered to be universal and most effective.Use of household and tar soap with a concentration of from 60 to 75% is allowed. Due to its alkaline composition, the product easily dissolves blood proteins, wine, rust and other complex contaminants.

Wipe the bloody trail with ice cubes, rub with a bar of soap, place a cling film on top and wait 1 hour. After the expiration date, treat the area of ​​contamination with a toothbrush, blot with a wet cloth. Collect moisture with a dry cloth, use a vacuum cleaner to prevent mildew.

Hydrogen Peroxide Solution

The composition is convenient to use due to the bottle with a narrow tip. Optionally, you can replace the drug "chlorhexidine" concentration of 3-6%. Pour a small amount of peroxide on the stain, immediately blot the trail with a towel. Begin treatment at the edges of the stain to avoid spreading the stain. Do not hesitate, otherwise peroxide will penetrate deep into the cavity of the mattress.

Acceptable use of the drug in combination with a cotton disc. To do this, it is enough to apply the composition to the cosmetic sponge and carefully wipe the mark with it. The procedure ends with the use of a vacuum cleaner to remove excess fluid.

Baking soda

Prepare a homogeneous mass of baking soda and crushed sea salt, mixing both components in a 2: 1 ratio. Fill the mix with water so that you get a paste-like consistency composition. After all manipulations, moisten the blood stain with cold water in small quantities, distribute the mass of soda and salt over the surface of the contamination.

Begin to rub the product with your fingers, try not to go into a clean area. The exposure time varies from 30 to 60 minutes, it all depends on the degree of pollution and its old age. After the expiration date, remove the excess paper with a paper towel, rub the area with a toothbrush, rinse with cold water. Vacuum the stain, send the mattress to dry in fresh air.

Ice and dishwashing liquid

Blood contains in its composition protein, which collapses from exposure to hot water. Therefore, traces of such a plan must be removed exclusively by the cold cycle, for example, ice.

To prepare the composition, use the following scheme: pour boiling water 45-50 gr. chamomile or sage, cover, wait a quarter of an hour.After the time has elapsed, pass the solution through a cotton wool and gauze filter, fill the molds, and send them to the freezer.

Then wipe the place of contamination with ice cubes, then immediately drip a thick consistency gel onto the mattress to wash the dishes. Rub a medium hard toothbrush, then blot the soiled area with a towel soaked in cold water.

Repeat the procedure until the stain disappears completely. As soon as this happens, rub the treated area with a damp unpainted cloth, then collect the excess moisture with a vacuum cleaner.

Lemon acid

The composition is considered highly concentrated, so it can cope with even persistent stains. Prepare gruel from two bags of citric acid and 20 ml. purified ice water, distribute the resulting mass to the place of pollution, wait about a quarter of an hour.

Rub the stain area with a toothbrush, remove the residue with a paper towel. Wash up the treated area with cold water, repeat the action again if the situation requires it. Upon completion of cleaning, vacuum the mattress, dry it with a hairdryer.

You can also use lemon, but it is less effective in dealing with complex traces. Squeeze out the juice from the two fruits, soak a cotton swab in the resulting liquid, wipe the trail of blood, starting from the edge. Wait for about half an hour, do not allow the composition to dry. Each time moisten the mattress again and blot it with a towel.

Potato starch

Both potato and corn starch are allowed. Mix 3 sachets of product with purified water, moisten the stain with ice cubes, then apply the resulting slurry. Rub the mass into a bloody trail, wait for partial drying (about 20-30 minutes).

After this time, collect the excess and rub the stain with a toothbrush. Evaluate the result, if he did not please you, repeat the procedure again. However, this time, dilute the starch not with water, but with cold lemon juice. After cleaning the product, treat the mattress with a wet towel, then blot with a dry cloth, collecting moisture.

Sea salt

The product absorbs blood and other contaminants, but the procedure must be carried out several times. To achieve a better effect, before applying the composition, moisten the stain with cold water and rub it with a toothbrush. Complete the procedure by soaking with a dry towel and vacuuming.

Liquid glycerin and chalk

The product is able to cope with blood stains in a short time, but it should be applied only in a cold state. Proceed as follows: open the bottle, put it in the refrigerator for 15 minutes. After a time, spread the glycerin in a thin layer on the stain, wait half an hour and rub it with a toothbrush.

Then blot with a clean towel, repeat the manipulation several more times. When the pollution becomes faded, treat it with ammonia, sprinkle it with crushed chalk, press down with a cloth on top. Wait for about 20 minutes so that the bulk composition absorbs moisture. Shake off the remnants of the substance, vacuum the mattress.

Blood stains are considered to be complex pollution, but this does not mean that they can not be removed. If possible, conduct a preliminary test before using the composition on the main contamination. Watch out for the duration of exposure, do not break the proportions. As an effective way to remove traces of this kind, use ammonia, ice, hydrogen peroxide, glycerin, soap, salt and sea salt, soda, citric acid.

Video: how to remove the smell of urine from the mattress